Amiga.org

Amiga computer related discussion => General chat about Amiga topics => Topic started by: carvedeye on March 10, 2008, 09:21:54 PM

Title: can any one help........none amiga question?
Post by: carvedeye on March 10, 2008, 09:21:54 PM
Hi i know this has nothing to do with an amiga but i have just built a new system with an xblade case and havent the foggiest idea of how to connect the front usb and audio ports The motherboard im using is a GA-M57SLI-S4 board if any one can help i would be ever so gratefull
Title: Re: xblade case........none amiga question?
Post by: Flashlab on March 10, 2008, 09:25:14 PM
Wrong forum section and every motherboard and tower comes with a  :rtfm: !

Sorry to be so blunt, but come on!
Title: Re: xblade case........none amiga question?
Post by: amipac on March 10, 2008, 09:36:34 PM
The usb cable of the case panel must have some V+, V-,GND, etc signs. If you don't have the manual of your motherboard, go here GA-M57SLI-S4 (rev1.0) manual (http://www.gigabyte.com.tw/Support/Motherboard/Manual_Model.aspx?ProductID=2287) and download it.
Note: It is better first to check which m/b rev. you have (1.0, 1.1 or 2.0).
After that just follow the connection schematics on your manual. Good luck  :-)
Title: Re: xblade case........none amiga question?
Post by: carvedeye on March 10, 2008, 10:25:10 PM
@flashlab

i am well aware of the forum be amiga related only but the manual for my board does not match the the front usb and audio lead connectors they are different (i have also attached jpeg images to my thread are they visable?)
Title: Re: xblade case........none amiga question?
Post by: amipac on March 10, 2008, 10:53:56 PM
Quote

carvedeye wrote:
(i have also attached jpeg images to my thread are they visable?)


I don't see any images here m8   :roll:

EDIT
-----
I just checked the source code of this page and found that you inserted images with your local hard disk's url. You have to upload to a free photo hosting server and then insert the url here.
Alternate method is to use Rapidshare.com or megaupload.com etc to upload and paste here the link.  :-)
Title: Re: xblade case........none amiga question?
Post by: carvedeye on March 11, 2008, 11:03:08 AM
sorry i havent given much detail here...i have now managed to get the front usb ports connected but still cant get the front audio.

here is what the manual says
pin1 mic2_l
pin2 gnd
pin3 mic2_r
pin4 -acz_det
pin5 line2_r
pin6 fsense1
pin7 faudio_jd
pin8 nopin
pin9 line2_l
pin10 fsesnse2

here is what the front audio leads say (in no perticular order)
mic-in
ground
return L
spkout R
spkout L
return R
mic-bias

if any one could help?
Title: Re: xblade case........none amiga question?
Post by: persia on March 11, 2008, 03:07:34 PM
The manual from your board tells you to post in the wrong area of amiga.org?  Now, that's a strange manual!


Quote

carvedeye wrote:
@flashlab

i am well aware of the forum be amiga related only but the manual for my board does not match the the front usb and audio lead connectors they are different (i have also attached jpeg images to my thread are they visable?)
:rtfm:
Title: Re: can any one help........none amiga question?
Post by: persia on March 11, 2008, 03:09:55 PM
What your manual should say is to post the question in the Alternative Operating Systems section of the board.  

http://www.amiga.org/forums/forumdisplay.php?f=10


Title: Re: can any one help........none amiga question?
Post by: carvedeye on March 11, 2008, 06:02:44 PM
@ persia
        i see what you mean lol i wil go and do that now
sorry for being a pain the a**