Amiga.org
Amiga computer related discussion => Amiga Software Issues and Discussion => Topic started by: amiga4001 on January 28, 2008, 08:45:19 PM
-
I want to transfer a file from my peg2 to my os4 classic amiga4000.
The Peg2 is running RC-ftpd as ftp server and amiftp is running on the amiga4000.
I already transferred some small files with no problems.
But this is a bigger file (1gb .zip) which freezes after transferring about 50 MB on the amiftp side.
The ftp server keeps on working no problem but amiftp just freezes.
The amiga4000 itself keeps on working normally.
It has a mediator pci board with a rtl8029 ethernetcard.
The driver is the build in driver for these cards from the os4 installation.
It is transferring onto a normal ffs harddisk.
Any suggestions?
I just tried again but all amiga4000 freezes after a short transfer off this file.
But when I set output to ram: it keeps on transferring nicely!
If only I had 2 GB off ram on that machine..
I even tried the OS4 boot partition to transfer to same problem..