Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: motorollin on January 04, 2008, 01:47:22 PM

Title: Rounded SCSI cables in the UK
Post by: motorollin on January 04, 2008, 01:47:22 PM
I'm trying to get hold of a rounded SCSI cable in the UK, but I can't find the one I'm looking for. I'm currently using an Adaptec 68-way LVD/SE ribbon with a terminator at one end. I would like a rounded version of that cable. It needs to support at least 2 devices (plus controller - so three connectors in total). If anyone knows of a supplier, please let me know.

--
moto
Title: Re: Rounded SCSI cables in the UK
Post by: alexh on January 04, 2008, 02:15:08 PM
http://www.cable-trader.co.uk/item.php?iid=1014

Title: Re: Rounded SCSI cables in the UK
Post by: motorollin on January 04, 2008, 02:23:25 PM
Cheers mate! I will contact them to get the measurements between the connectors.

--
moto
Title: Re: Rounded SCSI cables in the UK
Post by: motrucker on January 05, 2008, 02:30:31 AM
Another good source for cables is:
http://www.redmondcable.com/index.asp?pgid=1
If they don't stock it, they'll make it up for you. Prices are usually fair too. Shipping for you will be more however...
Title: Re: Rounded SCSI cables in the UK
Post by: tokyoracer on January 05, 2008, 05:00:22 AM
Are you after the usual 25 - 50 pin SCSI 1 cable?
Title: Re: Rounded SCSI cables in the UK
Post by: alexh on January 05, 2008, 11:03:19 AM
No, he's after a 4-way (2*devices + controller + terminator) INTERNAL 68-pin UltraWide SCSI-3 cable for his Cyberstorm MKIII.

@Motorolin
I think you have to ignore the photographs on that site the same photo is used on the 4-way, 6-way and 8-way cables!
Title: Re: Rounded SCSI cables in the UK
Post by: motorollin on January 05, 2008, 11:23:16 AM
Quote
alexh wrote:
I think you have to ignore the photographs on that site the same photo is used on the 4-way, 6-way and 8-way cables!

Yes I did notice the picture was the same for all the cables - laziness! ;-) Also, the connectors look to be in quite an inconvenient arrangement on that picture, so I have contacted them to get the measurements between the connectors.

--
moto