Amiga.org

Amiga computer related discussion => General chat about Amiga topics => Topic started by: Pyromania on December 27, 2007, 03:35:10 AM

Title: Doommaster, what a clown
Post by: Pyromania on December 27, 2007, 03:35:10 AM
http://tinyurl.com/3xfb3t

Check out Doomasters (HansCampbell ) comment at the following link. He is accusing us of stealing the NewTek promo video from him and putting it on YouTube. He even informed YouTube and asked for it to be removed. Ummmm, excuse me but this was a free video NewTek sent to everyone that asked for it. We did not get it from Doomaster and I am sure NewTek would not like to hear that he thinks it is his property. Next he will be telling us we stole the DiscreetFX video too.
Title: Re: Doommaster, what a clown
Post by: TiredOLife on December 27, 2007, 04:37:34 AM
It's amusing that he complains about having his property taken given his track record.
That it's not even his property just makes me laugh more.
He is indeed a clown.
Title: Re: Doommaster, what a clown
Post by: motorollin on December 27, 2007, 09:26:35 AM
What a knob!

--
moto
Title: Re: Doommaster, what a clown
Post by: Amiduffer on December 27, 2007, 09:38:54 AM
Well, I used my account there to tell him to (bleep) off. {bleep}.  :roll:
Title: Re: Doommaster, what a clown
Post by: Pyromania on December 27, 2007, 09:55:19 AM
Thanx Amiduffer
Title: Re: Doommaster, what a clown
Post by: Homer on December 27, 2007, 12:59:57 PM
Marvellous  :lol:

 :popcorn:
Title: Re: Doommaster, what a clown
Post by: on December 27, 2007, 03:34:32 PM
I suppose I'll simply never understand why anyone pays attention to him any more.

Wayne
Title: Re: Doommaster, what a clown
Post by: A1260 on December 27, 2007, 03:53:13 PM
Quote
the premier psycho troll


strikes again... hilarious!  :lol:  :lol:  :lol:
Title: Re: Doommaster, what a clown
Post by: on December 27, 2007, 03:58:06 PM
Quote

A1260 wrote:
Quote
the premier psycho troll


strikes again... hilarious!  :lol:  :lol:  :lol:

George is not even close.  Unfortunately, I forget the name of the original Internet idiot who was far worse than doomy.  Tim something or another?

Wayne
Title: Re: Doommaster, what a clown
Post by: McVenco on December 27, 2007, 03:58:34 PM
Quote
Wayne wrote:

I suppose I'll simply never understand why anyone pays attention to him any more.


It's just to keep his name appearing in direct relation with the words "scam artist", "ripoff" or general "not to be trusted".

If we stop paying attention to him people might even start to think he's a bona fide (Amiga) person. Which he isn't.
Title: Re: Doommaster, what a clown
Post by: bloodline on December 27, 2007, 04:00:46 PM
Quote

Wayne wrote:
Quote

A1260 wrote:
Quote
the premier psycho troll


strikes again... hilarious!  :lol:  :lol:  :lol:

George is not even close.  Unfortunately, I forget the name of the original Internet idiot who was far worse than doomy.  Tim something or another?

Wayne


Tim Rue? Cooksey? :-)
Title: Re: Doommaster, what a clown
Post by: on December 27, 2007, 04:02:44 PM
Quote

bloodline wrote:
Tim Rue? Cooksey? :-)

Yes, shutter... Both...

Thanks, I think.  :)

Wayne
Title: Re: Doommaster, what a clown
Post by: Reynolds on December 27, 2007, 04:02:58 PM
Wayne: maybe it´s entertaining...?
Title: Re: Doommaster, what a clown
Post by: on December 27, 2007, 04:10:54 PM
Quote

Reynolds wrote:
Wayne: maybe it´s entertaining...?

That would be very sad indeed.
Title: Re: Doommaster, what a clown
Post by: therail on December 27, 2007, 06:07:15 PM
isnt tim rue the guy that made up all that 256bit crap about the amiga arcitecture? or something like that about it. and didnt he show up unwanted/unannounced to some amiga shows/parties? ciuld be mistaken.
Title: Re: Doommaster, what a clown
Post by: tokyoracer on December 27, 2007, 06:16:49 PM
Best check my "Cock-o-meater" on this one...

"IT'S OFF THE SCALE!" :lol: I'm so mature. :roll:

In all seriousness, i'm amazed someone his age is acting such a twit.
Title: Re: Doommaster, what a clown
Post by: Pyromania on December 27, 2007, 08:50:48 PM
Your probably right Wayne I should have done the same thing the YouTube staff did and just ignore him. I just could not believe the nerve of him claiming that this NewTek promo video was his property and I stole it from him. I had no idea it was on his site or that his site even existed. Maybe he did put it on the internet first, who knows?

No one knew about it since his site is a obscure unknown website. I captured it from VHS and put it on YouTube where many people that never had an opportunity  to view it could see it. Many European Amiga owners never saw these early NewTek videos. I correctly labeled it as a promo video made by NewTek and took no credit for it's creation. Not sure where Doomy is coming from on this one.
Title: Re: Doommaster, what a clown
Post by: Skyraker on December 27, 2007, 09:13:07 PM
I made a comment , but i doubt it will stay long.

Title: Re: Doommaster, what a clown
Post by: Pyromania on December 27, 2007, 09:14:31 PM
Strong words, did Doomy rip you off Skyraker?
Title: Re: Doommaster, what a clown
Post by: Skyraker on December 27, 2007, 09:16:52 PM
No, he's just a {bleep}.. who is doing us no favours.... I guess i'm not either , but at least i'm not a thief.

 
Title: Re: Doommaster, what a clown
Post by: on December 27, 2007, 09:20:01 PM
@skyraker,

OT, but long time, no see.
Title: Re: Doommaster, what a clown
Post by: Pyromania on December 27, 2007, 09:21:22 PM
Who is the most loved? McBill, Doomy or AmigaMac?
Title: Re: Doommaster, what a clown
Post by: redrumloa on December 27, 2007, 09:22:37 PM
Quote

Wayne wrote:
George is not even close.  Unfortunately, I forget the name of the original Internet idiot who was far worse than doomy.  Tim something or another?

Wayne


Terry Cooksey?
Title: Re: Doommaster, what a clown
Post by: Skyraker on December 27, 2007, 09:27:20 PM
@Wayne

I check in a couple of times a week... sometimes pop over to the other site to grin at the hysterics... (womens institute springs to mind)... nothing to post unless a) something actually happens or b) Bill shows his face again.

Regards anyway m8.

Title: Re: Doommaster, what a clown
Post by: Crom00 on December 27, 2007, 10:04:39 PM
By that logic the Tricaster promos I have in my posession should be taken off of YouTube. Oh wait, NewTek posted them.

If Newtek had the time I'm sure they'd put tons more NewTek promo vids on you tube....

His site is weird, he talks about how long he's been a computer user but... there's no example of what he actually does with them.

What's really disturbing is after his last ebay scam he waited until AFTER he cancelled his EBAY account and posted a picture of himself smirking...


 :crazy:
Title: Re: Doommaster, what a clown
Post by: TheMud on December 27, 2007, 10:09:38 PM
Ehmmm... What nick's does Doommaster have on this Forum ? ...
Title: Re: Doommaster, what a clown
Post by: Nikolai on December 27, 2007, 10:13:06 PM
Quote

McVenco wrote:
Quote
Wayne wrote:

I suppose I'll simply never understand why anyone pays attention to him any more.


It's just to keep his name appearing in direct relation with the words "scam artist", "ripoff" or general "not to be trusted".

If we stop paying attention to him people might even start to think he's a bona fide (Amiga) person. Which he isn't.


So apperently he's not well liked here, haha.
What's the reason(s)?

Title: Re: Doommaster, what a clown
Post by: redrumloa on December 27, 2007, 10:21:27 PM
Quote

TheMud wrote:
Ehmmm... What nick's does Doommaster have on this Forum ? ...


He doesn't, he is banned.
Title: Re: Doommaster, what a clown
Post by: tokyoracer on December 27, 2007, 10:21:35 PM
Were do we all start?!
Title: Re: Doommaster, what a clown
Post by: dammy on December 27, 2007, 10:23:11 PM
Quote
isnt tim rue the guy that made up all that 256bit crap about the amiga arcitecture? or something like that about it. and didnt he show up unwanted/unannounced to some amiga shows/parties? ciuld be mistaken.


Sounds more like Shawn The Bus Troll.  Tim has been pretty stable and positive member of the AROS community actually.  I don't think he really needs to be lumped in with Cooksie.

Dammy
Title: Re: Doommaster, what a clown
Post by: bloodline on December 27, 2007, 10:29:56 PM
Quote

dammy wrote:
Quote
isnt tim rue the guy that made up all that 256bit crap about the amiga arcitecture? or something like that about it. and didnt he show up unwanted/unannounced to some amiga shows/parties? ciuld be mistaken.


Sounds more like Shawn The Bus Troll.  Tim has been pretty stable and positive member of the AROS community actually.  I don't think he really needs to be lumped in with Cooksie.

Dammy


Sorry, that was my fault! Wayne mentioned Tim and meant Cooksey as an alternative :-)

Shawn the bus arch troll was pure troll genious! I'll never forget his unique understanding of computer hardware :-D
Title: Re: Doommaster, what a clown
Post by: TheMud on December 27, 2007, 10:34:48 PM
Quote

redrumloa wrote:
Quote

TheMud wrote:
Ehmmm... What nick's does Doommaster have on this Forum ? ...


He doesn't, he is banned.


*LOL* ... I just thougt for a little time he was Meth**** ... Don't know why :-S
Title: Re: Doommaster, what a clown
Post by: Pyromania on December 29, 2007, 01:48:55 AM
Your comment is still on there Skyraker, LOL

 :-D