Amiga.org
Amiga computer related discussion => Amiga Desktop Audio and Video => Topic started by: Colani1200 on December 10, 2007, 08:57:41 AM
-
I tried to get Hivelytracker 1.4 to work on my A1200 desktop yesterday with no success. It starts up fine, I can load mods, but when I press play, it simply freezes. I am using AHI V6 from Aminet with Paula. Any ideas? (Yes, I know there is a Hivelytracker forum, but I thought I'd ask here first...)
-
Now just wait Xeron to appear :) I use Hively only on OS4, I haven't tried the 68k version.
-
I've appeared, but I don't know what to say... I only use the OS4 version, too. Buzz is responsible for the os3.x and aros ports...
Do other AHI programs work? Does "Unit 0" make a noise when you do the test sound in AHI prefs?
Edit: BTW, if you DO ask on the hivelytracker forum, syphus should see it and he uses hively on a1200/paula/os3.x.
-
User "d0pefish" is a H.T. user (on A4000) he may be able to help you.
-
Does it work on your A1200T?
-
xeron wrote:
Do other AHI programs work? Does "Unit 0" make a noise when you do the test sound in AHI prefs?
I don't know (yet) if other programs work. Regarding "Unit 0": What actually is this? It gave me no test sound when I tried, but should it do so? I have selected Paula as AHI device, test sound works fine with it, I tried several modes (e.g. 8 bit, 14 bit).
Edit: BTW, if you DO ask on the hivelytracker forum, syphus should see it and he uses hively on a1200/paula/os3.x.
Thanks for the hint, maybe I contact him directly.
-
ChaosLord wrote:
Does it work on your A1200T?
I can't try, it is not working at the moment :-(
-
@Colani1200
"Unit 0" is what hivelytracker uses to play sounds through AHI. If Unit 0 isn't working, hivelytracker won't work. When you go into AHI prefs, select unit 0 from the cycle gadget and click "Test Sound". If you get a sound, then AHI is correctly installed and at least configured well enough to get sound out of it, and so the problem is with hivelytracker.
If you don't get a sound, or you get an error, the problem is with your AHI installation.
BTW: 68030 is too slow to usefully use hivelytracker. A future version may include a 68k assembler optimised replayer which would help, but until then you really need an 060.
-
xeron wrote:
68030 is too slow to usefully use hivelytracker.
hmm... OK... maybe the binary should be named "ht-060" instead of "ht-020" ;-)
I should really get my 1200T working again. Or build an Aros box...
-
Probably :-)
Hively was written specifically for PPC/OS4, so its all written in C and not optimised for paula playback (unlike the original AHX).
-
I got the same problem as you when I first installed. Unit 0 was not configured. go to prefs/AHI and you'll figure it out.
http://www.hivelytracker.com/forum.php?action=viewthread&id=50
-
yea, HT would not run at all on my A1200. I'm pretty sure it was my no FPU 030 though :-)
I'm going to give it another go now that I have an 060.