Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Craven1200 on November 26, 2007, 07:28:19 PM

Title: CyberStorm MK1 maprom jumper?
Post by: Craven1200 on November 26, 2007, 07:28:19 PM

Hi,

i wanted to use Blizkick with my CyberStorm  mk1..
however blizkick reports that it needs a card with maprom...

since i have no manual..

how can i activate that ?

Title: Re: CyberStorm MK1 maprom jumper?
Post by: amiga92570 on November 26, 2007, 07:39:15 PM

http://amiga.resource.cx/exp/cyberstorm1#m_cyberstorm

Title: Re: CyberStorm MK1 maprom jumper?
Post by: HammerD on November 27, 2007, 07:18:58 AM

Try:

c:blizkick devs:kick39.rom CPUCARD QUIET

where kick39.rom is your rom file

I had to do that with my A3640 card and also make sure the maprom jumper on the card itself was set to enable.

I added this line right before Setpatch

So:

c:blizkick devs:kick39.rom CPUCARD QUIET
SetPatch NOROMUPDATE QUIET

Works for me :)  Now I have the latest modules installed!

next for me is to find out how to burn some eproms :)

Title: Re: CyberStorm MK1 maprom jumper?
Post by: Craven1200 on November 27, 2007, 12:20:05 PM

well i had no ram on the mainboard  (only chipmem)

when i added some ram blizkick started to work  :-o

thanks for the advice.