Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: ddniUK on November 18, 2007, 02:20:28 AM

Title: BPPC not seen in SYSinfo. Also 0mhz in Scout??
Post by: ddniUK on November 18, 2007, 02:20:28 AM

Hi all, my BPPC works perfectly well. It is 603e clocked at 175mhz with a 50mhz 68060

The board is either not recognised by system info tools or is reported as running at 0mhz

I am using Warpup 5.1 from http://phase5.a1k.org/

has anyone any idea what the issue may be?

Thanks

Title: Re: BPPC not seen in SYSinfo. Also 0mhz in Scout??
Post by: Akiko on November 18, 2007, 02:39:06 AM

I was having similar problem but today my CSPPC suddenly stoped working.

Have you  tried whichamiga (http://aminet.net/search?query=whichamiga) ?

I also used the settings in the freespace demo that display PPC Mhz.

Title: Re: BPPC not seen in SYSinfo. Also 0mhz in Scout??
Post by: stopthegop on November 18, 2007, 05:30:06 AM

I think whichamiga needs Powerup (or Powerup emulation).  Since you have WarpUp already installed, you'll need the file ppc.library from the emulation package.  I have version 46.41 (not sure if that is the latest).  Also recommend getting the latest boards.library.  Are you able to run any of the warp demos?  i.e. gearsppc.exe?  

Title: Re: BPPC not seen in SYSinfo. Also 0mhz in Scout??
Post by: ddniUK on November 18, 2007, 09:05:51 AM

hi thanks for the replies, yes all warp demos and games run well.

I use lots of WOS apps and datatypes with no problems too.
Whichamiga.

powerpc.library v16.1
ppc.library v46.24
warp.library v5.1
warpHW.library v1.0

On boot I get the powerpc/wos warning and have to terminate it.

Title: Re: BPPC not seen in SYSinfo. Also 0mhz in Scout??
Post by: stopthegop on November 18, 2007, 04:39:22 PM

Maybe try the latest ppc.library?  I know from reading the release notes that a lot of bugs were fixed in subsequent versions.  

Title: Re: BPPC not seen in SYSinfo. Also 0mhz in Scout??
Post by: Ancalimon on November 18, 2007, 05:17:13 PM

Quote

ddniUK wrote:

On boot I get the powerpc/wos warning and have to terminate it.

This is not right as far as I remember.

I used blizkick and some thing called BPPCFix or something similar.

I was the only way I could properly use all powerup and warpup applications at the same time. You have to remove the ppc.library from being resident by using it.