Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: actung_bab on November 11, 2007, 10:25:37 AM

Title: hi l went mad and brought a 1.3 wb ami 2000 need help
Post by: actung_bab on November 11, 2007, 10:25:37 AM
hi amiga people madpat here

just few need some help with a amiga 2000 l brought

l havent got it yet but from what l read l thinking its

omg wb 1.3 no hard drive . apprenty its still got the seal on

the case .

sounds like hasint been going in a few years.

whould it pay for me to check the battery for leakage

and what other things to do with the machine

l dont know whats come over me os4 is out soon for my ppc

blizzard and am buying a 1.3 wb 2000 just shoot me

l have brought a 2091 scsi hard drive controller whould this

have exta ram on board.

also what is the best way to upgrade the rom from 1.3

l have spare amiga 1200 3.0 roms but these whouldint work with the 2000

my future plans for the mighty 7mhz 2000 is to run my amiga

cnet bbs from it is there any graphics cards available for

the 2000

many thanks in advance

l whould in future like to try video toaster card


 :-D
Title: Re: hi l went mad and brought a 1.3 wb ami 2000 need help
Post by: countzero on November 11, 2007, 10:37:34 AM
any volunteers for translation ?
Title: Re: hi l went mad and brought a 1.3 wb ami 2000 need help
Post by: Jope on November 11, 2007, 10:42:26 AM
Quote

actung_bab wrote:
whould it pay for me to check the battery for leakage

It would be a good idea.

Quote
l have brought a 2091 scsi hard drive controller whould this have exta ram on board.

It is possible that it has either 512kB, 1MB or 2MB or RAM on board. You can determine this by looking at the card once you get it. 4 chips per 512kB. There's also a jumper next to the RAM that has the sizes printed next to each setting.

Quote
also what is the best way to upgrade the rom from 1.3

1) open case
2) determine version of motherboard, if German 4.x then solder a wire onto your 2.04/3.1 rom chip between pins 1 and 31. If American 4.x or better, no wire needed on the chip.
3) swap rom chips
4) close case

Quote
l have spare amiga 1200 3.0 roms but these whouldint work with the 2000

True.

Quote
is there any graphics cards available for

the 2000

Yes, several.

http://amigahardware.mariomisic.de/cgi-bin/showcat_en.cgi?CATID=16

All of the Zorro II compatible cards will work.

You will need at least an 030 processor in order to be able to use a graphics card.
Title: Re: hi l went mad and brought a 1.3 wb ami 2000 need help
Post by: Jope on November 11, 2007, 10:46:39 AM
Quote

countzero wrote:
any volunteers for translation ?


Sentences begin with a capital letter, and there is no space in front of punctuation.

Now this thread contains two postings that don't help the OP in any way, but merely make us two look anal-retentive. :-)
Title: Re: hi l went mad and brought a 1.3 wb ami 2000 need help
Post by: A4000_Mad on November 11, 2007, 11:34:07 AM
Correct me if I'm wrong, but aren't you the bloke that invented Tipex? :-D
Title: Re: hi l went mad and brought a 1.3 wb ami 2000 need help
Post by: Jope on November 12, 2007, 07:34:26 AM
Quote

A4000_Mad wrote:
Correct me if I'm wrong, but aren't you the bloke that invented Tipex?

I at least answered to the OP. ;-)
Title: Re: hi l went mad and brought a 1.3 wb ami 2000 need help
Post by: actung_bab on November 12, 2007, 10:30:52 AM
hi thanks for the that . alot of good info .

its a nz model
Quote


yes l will open the case once l get it .

as l need to add scsi card when l get that.