Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: JLPedro on November 08, 2007, 05:17:03 PM

Title: Nec FD1231H
Post by: JLPedro on November 08, 2007, 05:17:03 PM

 Does any one knows were is the jumper to switch this drive from d1 to d0?

Title: Re: Nec FD1231H
Post by: rkauer on November 09, 2007, 09:49:00 PM

 Swap pins 12 x 14 in floppy cable or between the header and the floppy board...

 Does do the trick.

Title: Re: Nec FD1231H
Post by: JLPedro on November 14, 2007, 06:42:29 PM

Didn't work, swapping the pin 12 to 14. I will try to buy a new drive , maibe a sony mp or a Samsung 321b, they sell those new.

Title: Re: Nec FD1231H
Post by: rkauer on November 14, 2007, 08:34:39 PM

 In the worst case, keep it to use as an external drive (DS1). ;-)