Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: TheMagicM on July 12, 2003, 08:41:03 PM

Title: Pegasos motherboard questions
Post by: TheMagicM on July 12, 2003, 08:41:03 PM

I just recieved my peggy, bought a case and a whole bunch of other stuff...the only problem is how do I power it up???  There is no provision on the motherboard that lets you hook up the power button on the case to the motherboard, therefore, I cannot turn on the system?



or am I overlooking something?

Title: Re: Pegasos motherboard questions
Post by: Kronos on July 12, 2003, 08:46:19 PM

There should be a piece of paper included that helps you on that ...

In the front area you will fin d 4 connectors for ribbon-cables,
2 for IDE, 1 for floppy and one whis is misused as fronpanel.

The lowest 2 pins are pwr-on, followed by reset and the LEDs.

Title: Re: Pegasos motherboard questions
Post by: amigamad on July 12, 2003, 08:49:35 PM

of coarse there is it would be no use otherwise read the documetation . :-?

Title: Re: Pegasos motherboard questions
Post by: TheMagicM on July 12, 2003, 08:50:59 PM

I would read the documentation if it came with it?

Thanks.

Title: Re: Pegasos motherboard questions
Post by: Samuar on July 12, 2003, 08:53:49 PM

This isn't the first thread about this. I had similar issues. Check this (http://www.amiga.org/forums/showthread.php?t=3200) out.

Title: Re: Pegasos motherboard questions
Post by: JoannaK on July 12, 2003, 09:03:41 PM

Only paper documentation that came with pegasos (thus you should have it too) is sinlge paper describing all necessary connectors on board. If you ain't got that paper look from CD:  (Mos 1.3) .. it'll has same info on PDF files.

on DOCS/AUDIO.PDF are pinouts for audio connectors
and DOCS/FRONTPAN.PDF are pinouts for front panel connector...

And I seem to remember that this same info was available on net, but can't remember where...

Title: Re: Pegasos motherboard questions
Post by: TheMagicM on July 12, 2003, 10:12:00 PM

yes, thanks for the help..I ftp'd the MOS cd and the PDF's were there, I appreciate the help guys.

-Alex

Title: Re: Pegasos motherboard questions
Post by: Targhan on July 12, 2003, 10:25:23 PM

@TheMagicM

If you have any more questions, you are free to visit #morphos on arcnet.  us1.arcnet.vapor.com  Usually, there is always someone there willing to help.  I put a direct webchat interface up on MorphZone for getting to the channel (after logging in the box appears on the right).  After that, a single click logs you into the system (Really helpful if you are on  a friends computer, or a computer from work...)  Personally, I prefer AmIRC :-)

Title: Re: Pegasos motherboard questions
Post by: takemehomegrandma on July 12, 2003, 10:36:41 PM

@ TheMagicM

Hello. Have a look at my (and others) posts about this in this thread (http://www.amiga.org/forums/showthread.php?t=3200) (page 2 and forward).

:-)

Title: Re: Pegasos motherboard questions
Post by: strobe on July 13, 2003, 12:04:31 PM

Targhan, is that avatar a PC user or an ANN "debater"?

:lol:

Title: Re: Pegasos motherboard questions
Post by: TheMagicM on July 13, 2003, 02:36:57 PM

thanks again Targhan, all.    The only problem now is..I bought a used Voodoo 3 PCI card.. and it doesnt work! :(   So I went on ebay and bought a new Radeon 7000 AGP for $22 + shipping..now I need to wait for it to get here.. I already have everything less the vid card and RAM.