Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Gav on October 13, 2007, 09:22:03 PM

Title: Warpup/BPPC question
Post by: Gav on October 13, 2007, 09:22:03 PM

Hi
Just got a question since i have my amiga up and running again.

I have installed the latest version of warpup and also added added the line to remove the BPPC.device from memory.
Now when i used to click on ata3.prefs it would recognise my ppc card but now it only reports a 68060 present,is this normal?

Then when i tried the demo of earth 2140 i get a ppc exception error.
Hope someone can help me out as i have struggled to get my amiga the way it is now over the past few months.
Thanks again.


"Edit"
Which amiga also reports a 68060 but no mention of Bppc.

Title: Re: Warpup/BPPC question
Post by: Gav on October 13, 2007, 10:07:59 PM

PowerPC Data access exception (store operation)
Page fault - Access to 823BEEA0
The excepting instruction is located at 6338F240
Task name: 'Background CLI_PPC1'  Task address: 60B7B4D0  Task ID: 108

SRR0: 6338F240    SRR1:  0000F070     MSR:   00003040    HID0: 0040C000
PVR:  00070201    DAR:   823BEEA0     DSISR: 42000000    SDR1: 60C0001F
DEC:  00005CE8    TBU:   00000001     TBL:   7487BF8A    XER:  00000000
CR:   80000000    FPSCR: 00000000     LR:    634067FC    CTR:  00000000

R0-R3:   00000000 6355CDA0 60B7B9A8 823BEEA0   IBAT0: 00000000 00000000
R4-R7:   823BEEA0 63B1D948 AD56DD45 9695AA82   IBAT1: 00000000 00000000
R8-R11:  D72C154B 5A3FAD50 00000000 60904FB4   IBAT2: 00000000 00000000
R12-R15: 823BEEA0 FFFFFFFF 00000000 00000000   IBAT3: 00000000 00000000
R16-R19: 63B1D944 00000000 00000000 00000000   DBAT0: 00000000 00000000
R20-R23: 00000000 00000000 00000000 00000000   DBAT1: 00000000 00000000
R24-R27: 00000000 00000000 00000000 00000000   DBAT2: 00000000 00000000
R28-R31: 00000000 00000000 00000000 00000000   DBAT3: 00000000 00000000

F0-F3:     0               0               0               0          
F4-F7:     0               0               0               0          
F8-F11:    0               0               0               0          
F12-F15:   0               0               0               0          
F16-F19:   0               0               0               0          
F20-F23:   0               0               0               0          
F24-F27:   0               0               0               0          
F28-F31:   0               0               0               0          

Warp-OS                                              2001 by Sam Jordan

Title: Re: Warpup/BPPC question
Post by: stopthegop on October 13, 2007, 11:02:14 PM

Sounds like you may have the "real" ppc.library in Libs:
It has to be the WarpUp version (which emulates PowerUp).  Easiest way to check is be the version.  

Title: Re: Warpup/BPPC question
Post by: Gav on October 13, 2007, 11:16:18 PM

Thanks for the reply,well just to make sure i downloaded the latest warp update and placed the ppc.lib file from that folder in my libs drawer and i still get the same exception message.

Hope someone can help me out  :-?

UPDATE

I got the game running using the V7 option after i copied the folder from os3.9 cd.

Title: Re: Warpup/BPPC question
Post by: Gav on October 14, 2007, 01:58:33 AM

When you install WarpUP you get an option to either install warpos v14 or thte powerup compatible V7,now i have no idea at all which one i should choose.

Last time i installed this i choose V14 and when i did try and use V7 to see if this is why i get exceptions it wouldn't allow me to do so and i got the following message.

Sorry... an Error Has Occured!   Copylib: Can't open file  "Ram Disk:WarpUP-Warpos/V7/PowerPC.library"in line 46.

So if someone can tell which one is should choose that would be great.
Thanks