Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: lorddef on July 07, 2003, 11:23:05 PM

Title: MicroniK A1200 6860 Busboard rev5.43 power?
Post by: lorddef on July 07, 2003, 11:23:05 PM

I have a Micronik A1200 busboard and it has an 8 pin connector on it.  Is this a power connector? It doesn't look like an AT or an ATX connector to me.  Exactly how do I connect it up and do I even need to use it if I lareadly have power supplied to the motherboard?

Title: Re: MicroniK A1200 6860 Busboard rev5.43 power?
Post by: Markus_Bieler on July 08, 2003, 12:08:32 AM

perhaps this helps:

http://www.amiga-hardware.com/micro1200busmanual.lha (http://www.amiga-hardware.com/micro1200busmanual.lha)

Title: Re: MicroniK A1200 6860 Busboard rev5.43 power?
Post by: lorddef on July 08, 2003, 12:30:33 AM

Yeh it does.

It says that you dont need to use the power connector if you are using the A1200s original PSU, but you will only be able to use one card.  I have an eyetech tower with an eyetech PSU so I guess I'll be okay without it.  If all else fails I have the pinouts with this manual so I can always adapt the AT connectors to fit it.

ta