Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Gavilan on September 27, 2007, 02:35:45 PM

Title: Is this monitor Amiga compatible?
Post by: Gavilan on September 27, 2007, 02:35:45 PM

Hi guys!
Have the chance of getting 2 of these

Just wanted to know, according to your knowledge, if this monitor will be capable of display ALL native Amiga resolutions + Amiga resolutions using graphics crds

Thanks in advance

MITSUBISHI AUM1391A Specifications:

Manufacturer: MITSUBISHI
Model: AUM1391A
Also Known As: AUM 1391 A
Monitor Type:
VGA frequency compatible: Yes
VGA sync compatible: Yes
Max Resolution: 800 x 600
H Freq/ V Freq: 15-35KHZ / 40-75HZ
Sync Type: Sync on Green, Composite, Seperate
Connector: 1 BNC, PC Connector, Monitor Connector

Title: Re: Is this monitor Amiga compatible?
Post by: alexh on September 27, 2007, 03:14:44 PM

Yes.

This is a well known Amiga compatible Multi-Sync monitor. It supports both Amiga native and RTG compatible and also compatible with the low refresh rates of PAL.

However 800x600@75Hz + 14" screen is a bit poor for a gfx card.

Title: Re: Is this monitor Amiga compatible?
Post by: Plaz on September 27, 2007, 03:22:14 PM

An oldie, but goodie. I own one myself. For VGA mode the resolution is low, but they work great for the native NTSC/PAL mode of Amiga. However, if you're using NTSC/PAL you're probably going to have to make your own video cable to go with it. I made one for mine (looong ago).

Plaz

Title: Re: Is this monitor Amiga compatible?
Post by: Gavilan on September 27, 2007, 04:48:36 PM

Thanks a lot for the feedback guys

I imagined that 800x600 wouldnt be GREAT but...its what it is available, and in this parte of the world, to have one of this is almost impossible...so..i will go for them!!!

@Plaz: could you tell me where to find pinouts to build such a cable myself?

Kind Regards

Sebastian