Amiga.org

Amiga computer related discussion => Amiga Marketplace => Topic started by: hamtronix on September 13, 2007, 05:48:11 PM

Title: WTB: SCSI 50 Pin Cable
Post by: hamtronix on September 13, 2007, 05:48:11 PM

Hi I need a SCSI 50 Pin cable. Preferable with the connector for the board followed closely by the connector for the first device (2 - 3 inches) and then about 12 or so inches to the next 50 pin connector and then terminated or more connectors. I would be willing to spend in upwards of 1 - 2$ plus shipping for this cable. My A2000 is a little crowded now!

Title: Re: WTB: SCSI 50 Pin Cable
Post by: motorollin on September 13, 2007, 05:52:10 PM

Amigakit can make up a cable in any configuration you want. You would have to ask them for the price though. There are also SCSI cables on eBay.

--
moto

Title: Re: WTB: SCSI 50 Pin Cable
Post by: amiga92570 on September 13, 2007, 06:25:28 PM

I probably have one. Pm me your address.

Title: Re: WTB: SCSI 50 Pin Cable
Post by: Zac67 on September 13, 2007, 07:04:15 PM

Since the minimum spacing of SCSI connectors should be no less than three times the stub length (distance from cable to interface chip), you shouldn't space them closer than ~12cm. When using any longer stubs on your bus (max. 10cm), you'll have to space them accordingly.