Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: vic20owner on August 25, 2007, 07:14:29 PM
-
I finally got around to testing the neobitz s-video board I installed inside my A1200. At first I wasn't impressed. But, after using a 1084s for ahile, going back to the s-video really didn't look too bad in interlace. Not perfect, but acceptable.
Games look excellent. These pictures were taken with my camera phone so most of the poor sharpness is due to the camera not the monitor.
(http://amiga.cbmhacker.com/svideo.jpg)
(http://amiga.cbmhacker.com/s-video1.jpg)
(http://amiga.cbmhacker.com/s-video2.jpg)
(http://amiga.cbmhacker.com/s-video3.jpg)
-
Be a real warrior, do and use the RGB mode of your 1084S ! ;-)
-
Hmmm, that looks nice.. What advantages to you have with it? I don't know of any monitors that have S-Video in. Are you using on of those switch box thingies?
Steve
-
Why on earth do you have two clocks in your system? You have a battery backed clock on your accelerator, and yet you still added a battery backed 12 A'Clock. That serves no purpose. You probably ought to remove the clockport clock.
-
No I didn't "add" a battery backed clock. It was there when I bought my Amiga... didn't even know until I went to install the s-video board and larger hard drive.
Just didn't bother removing it...
Besides, it make my time twice as accurate as your time.
-
Actually my guess is that either one is inactive, or both are active and you're going to have some stability problems and time errors. You'd probably be smart to remove that.
-
Ok. I'll remove it. But it's unlikely that it is causing any issues because it's simply a battery backup for the onboard clock, not a clock itself.
-
vic20owner wrote:
Besides, it make my time twice as accurate as your time.
LOL! :lol:
-
Hmmm, that looks nice.. What advantages to you have with it? I don't know of any monitors that have S-Video in. Are you using on of those switch box thingies?
The advantage (here in the USA) is that we don't have SCART. So the closest we can get to RGB in is S-Video or Component video. Since component video is hard to convert from RGB (without building your own device or spending a lot of money) s-video was the next best option.
It works very well. Non-interlaced screens are very clear and completely stable. Interlace shows some flicker and is a little blurry, but still useable.
On my LCD TV, I can scan double everything going to VGA in, and then when I want to play games, I can switch over to S-Video (no unplugging anything) and see it in full color.
-
Told yawl it worked nicely!