Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: tonyyeb on August 21, 2007, 03:55:52 PM
-
Hi all
I'm after a SCSI CD ROM for internal install into my A3000. What type do I need? Anyone got an ebay/web link?
Thanks in advance
-
You can't fit a CD drive in the 3000 case, so you'll need an external unit.
-
Matt_H wrote:
You can't fit a CD drive in the 3000 case, so you'll need an external unit.
But can i attach it to the internal SCSI cable and have the case off the computer? Otherwise can you link to an external one that will work - without any extra cables, config etc... :-D
-
tonyyeb wrote:
But can i attach it to the internal SCSI cable and have the case off the computer? Otherwise can you link to an external one that will work - without any extra cables, config etc... :-D
Personnally, I took the case of a dead external SCSI SyQuest 44/88 drive and put a Plextor 12x drive in its place.
Any external SCSI box for a 5.25" half height device will do nicely. Just rip the old drive out and put you CD-ROM drive in it...
-
Hi all
Still looking for some answers on this. What type of SCSI connector will fit the back of my A3000 to allow connection of a SCSI CDROM?
Can someone link to say an ebay auction or an internet shop so I know what to look for. Don't want to buy the wrong one obviously!
Thanks again
-
Back of the a3000 has a 25 pin scsi connector.
all you need to do is buy an external scsi box and a cdrom and make sure you get a scsi cable that has the scsi pin connector same as the box on one end and a 25 pin on the other end.
box similar to this ebay (http://cgi.ebay.co.uk/CD-ROM-Drive-With-SCSI_W0QQitemZ200243635626QQcmdZViewItem?hash=item200243635626&_trkparms=72%3A12%7C39%3A1%7C66%3A2%7C65%3A12&_trksid=p3286.c0.m14.l1308)
the cable with this looks like 50 pin for box end and centronics type for computer end, so you would need to change it, probs a couple of pound from a computer shop.
this is probs the cable. ebay (http://cgi.ebay.co.uk/25-Pin-to-50-Pin-High-Desnity-SCSI-Cable-1-2M_W0QQitemZ120289882652QQcmdZViewItem?hash=item120289882652&_trkparms=72%3A12%7C39%3A1%7C66%3A2%7C65%3A12&_trksid=p3286.c0.m14.l1318)
you would have to confirm with cdrom seller which connector is on the back of the drive.
hope this helps.
-
Any (I say any) 50 pin SCSI CD-ROM will be OK.
One already in an external case with the termination in place is a ready-made solution. Just need the right cable.
The A3000 offers a 25 pin DB25 female connector (looks like a parallel port). The other side of the cable must match the SCSI enclosure you buy.
-
Bazzaq wrote:
the cable with this looks like 50 pin for box end and centronics type for computer end, so you would need to change it, probs a couple of pound from a computer shop.
Would it not be easier to get a Centronics to 25pin cable?
Thanks
-
its easier to change the cable completely. you cant get scsi extensions i dont think.