Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Dandy on August 02, 2007, 04:31:13 PM

Title: UW-SCSI on CSPPC
Post by: Dandy on August 02, 2007, 04:31:13 PM

Oouuch - I seem to have forgotten the keys I have to press on boot to access the SCSI config - wasn`t it the "Escape" key?

I looked in the CSPPC documentation, but couldn`t find it...
:help:

Title: Re: UW-SCSI on CSPPC
Post by: adolescent on August 02, 2007, 04:37:51 PM

Yes, hold the ESC key.

Title: Re: UW-SCSI on CSPPC
Post by: Dandy on August 02, 2007, 04:44:18 PM

Unfortunately that doesn`t work.

If I press "ESC" after having pressed "CTRL+A+A" (reset), the Amiga boots as normal.

 :-?

I have an Mediator with Voodoo4 attached, also an Commodore 1940 monitor connected to the Amiga video out for the "early" screens.

Title: Re: UW-SCSI on CSPPC
Post by: Flashlab on August 02, 2007, 04:48:03 PM

Do you have a keyboard that connects directly to the Amiga or some adapter?

Title: Re: UW-SCSI on CSPPC
Post by: Dandy on August 02, 2007, 04:58:15 PM

Quote

Flashlab wrote:

Do you have a keyboard that connects directly to the Amiga or some adapter?

Well - I have an original Amiga 4000 keyboard (PS2) connected to the Amiga.

And the "ESC" key works, if you`re aiming at that.

I checked it in the "Early Startup Menue", where you can toggle the screens between PAL and NTSC by pressing the "ESC" key...

Title: Re: UW-SCSI on CSPPC
Post by: Flashlab on August 02, 2007, 05:13:09 PM

Do you have the latest firmware on your CS-PPC? I thought I read somewhere (don't remember where unfortunately) that early versions didn't have a boot menu.

Title: Re: UW-SCSI on CSPPC
Post by: Dandy on August 02, 2007, 05:15:40 PM

Tsssss - don`t know, what it was - but now it works again with the "ESC"-button...

 :-o