Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: aggro_mix on July 14, 2007, 11:39:42 AM

Title: Need new PSU
Post by: aggro_mix on July 14, 2007, 11:39:42 AM

It seems like the PSU inside my Mirage 3000 tower just died :(

Elbox have used a Codegen 300X1 ATX PSU for this case. Can I just get any ATX PSU and just "swap" the mainboard connectors and the P9 PC-AT connector?

It seems the fuse inside the PSU is ok.

Title: Re: Need new PSU
Post by: aggro_mix on July 14, 2007, 05:32:10 PM

My problem is solved. I got a cheap ATX PSU and simply cut the wires from the one Elbox used.

Now, If I only can figure out how their power switch works so I don't need the nasty hack (joining ATX pin 14 to ground) :-D