Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: g7syj on June 06, 2007, 04:55:08 PM
-
is this any good for the amiga
BEKO 26wlk530HID
Connector Type
1 x SCART ( 21 PIN SCART )
1 x SCART (RGB) ( 21 PIN SCART )
1 x VGA input ( 15 PIN HD D-Sub (HD-15) )
1 x S-Video input
1 x headphones
i am thinking about buying one
-
Maybe they'll let you bring your Amiga into the store to try it out. :-)
-
g7syj wrote:
1 x SCART (RGB) ( 21 PIN SCART )
That will work but you will need a cable to connect the Amiga's 23 pin video output to the SCART input. This (http://amigakit.leamancomputing.com/catalog/product_info.php?products_id=226&osCsid=4c58c8b9c2813caff0db8cfb84525f93) would do the trick, and will give you the best possible quality from your Amiga.
g7syj wrote:
Note: No trees were killed in the sending of this message, but a large number of electrons were terribly inconvenienced
:lol:
--
moto
-
what i was thinking is i may be able to switch between 15khz and 31khz, i have got the scart cable i was just wondering if it was any good for 31khz.
i have been reading the thred on the CM345S and wonderd if that would do as well , if so which one rgb or rgb sync on green
thanks for the time and trouble
-
Yes the CM345S will convert from SCART to VGA, but if you're going to buy that screen then you won't need it. The screen has both VGA and SCART inputs, so will display 15KHz and 31KHz screens. All you will need to do is connect the Amiga's RGB output to the SCART connector with the cable I linked to, whatever your VGA source is to the screen's VGA input, and then switch between the RGB and VGA inputs on the screen depending on which display you need to see.
--
moto