Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: stopthegop on May 30, 2007, 08:15:55 PM

Title: PPC Question
Post by: stopthegop on May 30, 2007, 08:15:55 PM

Does anyone know why my PPC is reporting 0 Mhz when I use either scout, whichamiga, or listexp?   If I use showinfo it reports correctly (233 Mhz).  BTW, the WOS demo runs fine and PPC applications are working.  Just can't figure out why some tools keep showing the wrong speed for the PPC?  Any ideas?  

This is "showinfo" output:

5.WB:PPCTools> showinfo
CPU:                   PPC 604E   (PVR = 00090204)
CPU clock:             233.333333 MHz
Bus clock:             66.666666 MHz
Instruction Cache:     ON and UNLOCKED
Data Cache:            ON and UNLOCKED
Page table location:   08800000
Page table size:       2048 KBytes
Time base content:     00000006 629B40BE
CPU load:              45.63%
System load:           91.18%




AND THIS IS "listexp"


-- ListExp V37.1 -- Thore Böckelmann
 (ListExp is a part of the Identify package, see AmiNet util/libs)

** HARDWARE **

System:  Amiga 4000
CPU:     68060/66MHz (Rev 6), FPU=68060/66MHz, MMU=68060
PowerPC: 604e/0MHz (running WarpOS)
Chipset: AGA (RAMSEY F, GARY normal, CHUNKY n/a) VBR=0x082C3570
Agnus:   Alice 8374 Rev. 3-4 (Mode: NTSC)
Denise:  Lisa 8364 (Rev: 0)
AmigaOS: 3.9 (V45.57, BoingBag n/a, SetPatch V44.38)
         Exec V45.20   Workbench V45.3
Support: GraphicOS: Picasso96, AudioOS: AHI, TCP/IP: Miami
Clock:   Power 60Hz, VBlank 60Hz, EClock 715909Hz
RAM:     Motherboard 32 bit, 80ns, double CAS, 4x bandwidth

Memory:            CHIP    FAST   TOTAL ROM = 512.0KB   SLOW = 0
          PLAIN  ~2.0MB 131.0MB ~133.0MB
        VIRTUAL       0       0       0
          TOTAL  ~2.0MB 131.0MB ~133.0MB

** EXPANSIONS **

Nr ID      Address  Size Manufacturer         Product
----------------------------------------------------------------------------
 1 089E.A1 40000000 256M Elbox                #161 #0
 2 089E.21 50000000  16M Elbox                Mediator PCI 4000 Zorro III bridge expansion
 3 084F.02 00E90000  64K Sunrize Industries   AD516 audio
 4 089E.1D 51000000  16M Elbox                FastATA 4000 MKII IDE controller
 5 2140.64 00F01060 128K Phase 5              CyberStorm PPC accelerator SCSI host adapter
 

Title: Re: PPC Question
Post by: doctorq on May 30, 2007, 09:08:58 PM

Because Scout, listexp and IIRC WhichAmiga uses identify.library to display the info. This library is apparently only working correctly in PUP environments, as the mentioned programs should display correctly if they are launched under PUP.

Title: Re: PPC Question
Post by: keropi on May 31, 2007, 06:44:31 AM

oh no, stopthegop, your csppc is about to explode! better send it to me!

LOL


doctorq is right btw  :-D

Title: Re: PPC Question
Post by: rkauer on June 01, 2007, 05:53:17 AM

Very nice setup, BTW. :-D

Title: Re: PPC Question
Post by: stopthegop on June 01, 2007, 06:07:38 AM

T'ank you.  :)