Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Ami_GFX on May 26, 2007, 12:00:06 AM
-
I just bought a Y/C plus ycp-100 s-video board for the A2000 Toaster Flyer system I am building and there's a special cable required for this configuration. The Ycp-100 manual tells me this but doesn't tell me anything about the cable. Does anyone know anything about this cable--ie does it add another connecter to the rear ribbon cable or does it use the middle connector of the YCP-100 board?? Any information about this cable would be appreciated. Pictures of one or a pinout would be wonderful. Thanks
:-?
-
http://www.amiga-hardware.com/
Then search for YCP-100
-
I'm already way beyond what they have. I'm looking for specific information from somebody who might have actually used--or better yet put together a system like mine. Google has given me nothing more than the owners manual. An Amiga 2000 Toaster Flyer system with Y/c Plus card requires a special cable that was originally supplied by the manufacturer who is no longer around so my only option is to find one used--I could wait years--or make one myself. I'm looking for information to help me make one. Amiga-hardware-.com and Amiga.resource.cx only have general descriptions of this board and not the information I need.
-
I might have one in my basement, unfortunately it might be hard to find.
-
Do you remember if there were 2 or 3 cables from the Y/C card to the Toaster and Flyer??
-
I've got a PDF with specs for this. If you'll pmail me your email address I'll send it to you. Or is there any place I can upload it here on amiga.org for all to use?
-
@rwaters
Got your PDF. Exactly the information I needed Thanks a lot.
:-D :-D :-D