Amiga.org
Amiga computer related discussion => Amiga Marketplace => Topic started by: Treadwheel on May 20, 2007, 03:41:13 AM
-
Have a Phase 5 Fastlane for sale
on auction at ebay.
Will ship worldwide.
item #130115132108
Thanks
-
Wow that is expensive. Roughly 2x what I was expecting.
-
That's the price for a Cyberstorm 040 with scsi controller :-)
-
Relisted at lower price
New #130118466410.
Can't use it since my A4000T has a Mediator.
Was $599.00 new and saw one go for 400.00.
Have other items on my web page:
http://home.comcast.net/~cevoner/Prodpage.htm
that I'd add in for any Amiga.org member.
Thanks guys
-
I saw one go for 172$ (mine (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=150122087815&ssPageName=STRK:MESO:IT&ih=005)).
-
Uh oh.. still 3x what I'd expect ;) Well.. crazy ebayers ;)
-
well, I bought mine in 2000 for about 80 euros...
Good luck!
PS: I have a mediator too but I use it... what's wrong with that?
-
Also have Subway, Varoi Serial, and a Quikpak 060 with
128 ram in there.
I used the zorro riser but the Fastlane has phase
errors with hard drives. CD drives play music slow.
Either you need memory on the Fastlane or it does not
get along with those items.
I bought it recently so it should run without those products.
Read it had trouble with a Multiface. If you have a opinion
on how it could run it would be helpful.
I would just rather keep the other stuff.
-
I have some problems with memory managing, it seems that come capacitors are not OK anymore, I think I'll send it to Jean Jacque boulet in order to check it and eventually repair, but there are no conflicts with oter hardware and I have:
Towered Amiga 4000D with rom 3.1
CSPPC 060 and 200 MHZ PPC
Delfina Lite
Picasso IV
Mediator with:
1) Voodoo 3
2) RTL 8139D Ethernet board
3) Spider II USB
And the fastlane of course ;)
Im planning to buy a TV card too :P
Ah I upgraded the firmware to 8.5 version (z3scsi.device)
did you try it?
-
I have the A4000T which needs the riser card
to go above the Mediator stuff. I think
that is why the sync seems touchy.
It recognizes the Fastlane but its' only barely accessible.
My Mediator has:
1)Voodoo 3
2)Dlink Ethernet
3)Soundblaster
The Vario uses the Subway for USB which works great.
Thats my only zorro card which I do not wish to give up
for the Fastlane.
Also I use the 4000T's scsi for Harddrive/CD.
That may be a Fastlane quirk. I don't know the
z3scsi version but I can check.
If it doesn't sell I'd try without the Vario to see
if that works. I don't think I can disable the 4000T's scsi.
I'd be willing to trade for the DKB half card memory if
I can find one. Adding memory to the Fastlane may help too.
Thanks for the info.