Amiga.org
The "Not Quite Amiga but still computer related category" => Amiga Emulation => Topic started by: arkpandora on May 13, 2007, 02:01:46 AM
-
Hi,
I am a regular Amiga user, but for the first time I am trying a few virtual Amiga on WinUAE, and I'm running into a strange problem. I have installed a 3.1 Workbench on a hard drive. When I run it using Kickstart 3.0 or 3.1, ADF disks are unreadable (infinite read/write errors) when they are inserted after the hard drive has booted. However, if the ADF are booted, or if the Kicksart is 2.0 (or 1.3 on a hard drive where WB 1.3 is installed), ADF disks are fully and normally readable. Any tip in order to solve this problem ? I am using WinUAE version 1.3.2 because the latest versions don't work on my PC (a 500 MHz Pentium III running Windows 98) for an unknown reason. The Kickstart images I use are not from my own Amiga (I downloaded them), but if you suspect this may be a Kickstart problem, I will dump a 3.1 from my own Amiga.
Thank you for any help !
-
Hi again,
Another strange problem. When I create two hard drives, under KS 1.3 the icons on the second hard drive are not visible : the drive's window remains empty. But the CLI sees them, as well as any other Kickstart. They are standard icons.
I can't find any way to solve this either.