Amiga.org

Amiga computer related discussion => Amiga Software Issues and Discussion => Topic started by: Daniele on March 26, 2007, 11:02:39 AM

Title: Blizzard PPC 603e+ /160MHz
Post by: Daniele on March 26, 2007, 11:02:39 AM
Hello,

I have bought on ebay a Blizzard PPC 603e+ /160MHz with no ram.And I putted into my A1200 but when I type cpu and showconfig by shell it says that has 68040 processor.
On the board it's stated that is a Blizzard PPC603e+ /160MHz and I even tried the program showinfo but int only appear the 68040.
What's going on?
What to do to check if PPC is running?

Many Thanks

 
Title: Re: Blizzard PPC 603e+ /160MHz
Post by: cv643d on March 26, 2007, 11:10:12 AM
You need a newer program to check if it is active.
Title: Re: Blizzard PPC 603e+ /160MHz
Post by: Daniele on March 26, 2007, 11:13:27 AM
what program?
Title: Re: Blizzard PPC 603e+ /160MHz
Post by: Piru on March 26, 2007, 11:13:56 AM
ShowConfig has no clue of PPC CPU. Not even the AmigaOS 3.9 one.

You can try identify.library (http://www.aminet.net/util/libs/Identify.lha) or WhichAmiga (http://www.iki.fi/sintonen/sw/WhichAmiga.lha).
Title: Re: Blizzard PPC 603e+ /160MHz
Post by: Daniele on March 26, 2007, 11:16:10 AM
so? what can I use PIRU?
Title: Re: Blizzard PPC 603e+ /160MHz
Post by: Amigaz on March 26, 2007, 11:38:02 AM
You can also use SCOUT, search for it on www.Aminet.net
Title: Re: Blizzard PPC 603e+ /160MHz
Post by: Daniele on March 26, 2007, 11:57:43 AM
Hello,

I tried Scout but when I click on SYSTEM it says at all the voices identify.library required.
I installed the MUI.
Do I have install something else to see the PPC processor recongnized or there is a better program showing it?

many thanks
Title: Re: Blizzard PPC 603e+ /160MHz
Post by: derringer3 on March 26, 2007, 12:07:07 PM
you need at least 4mb of ram to work your ppc board. (if you don't put any memory in it.)

Anyway try sysspeed 2.6 (on aminet). Its got plenty of ppc test, so you can check your board too.
Title: Re: Blizzard PPC 603e+ /160MHz
Post by: Piru on March 26, 2007, 12:10:32 PM
What's wrong with identify.library or WhichAmiga?
Title: Re: Blizzard PPC 603e+ /160MHz
Post by: Daniele on March 26, 2007, 12:18:39 PM
Piru, it cannot find thses libraries.
And I don't know if install something of the PPC CD I only was succesfull installing MUI.

Thanks!
Title: Re: Blizzard PPC 603e+ /160MHz
Post by: Piru on March 26, 2007, 12:27:50 PM
See here (http://www.amiga.org/forums/showthread.php?t=28219)
Title: Re: Blizzard PPC 603e+ /160MHz
Post by: Daniele on March 26, 2007, 12:40:31 PM
Thx!

Which Amiga by Piru (Harry Sintonen) is definitely the best! Congrats coder!

And I wanna thank you very much!

According to Scout suggested by AMIGAZ (thanks to you too) it says that requires the identify.library.Where Should I have to install them?

Thanks to you too derringer2,I gave a look to sysspeed 2.6 but I was to hurry to check ifthe board I have bought was really working!

So thank you everybody for answering me but....

A little help and I'll be gratefull!

1) Do the PPC need some software to run application?

2) I don't know I to install the PPClibrary ,on the CD in bundle I cannot find any installation tool of this.

3) And what about Warp OS.At the moment I am running OS3.1 and do not wanna install OS3.9 right now.Do you have any idea how to provide me OS3.1 with Warp OS?

Many Thanks AmigoS
Title: Re: Blizzard PPC 603e+ /160MHz
Post by: derringer3 on March 26, 2007, 02:15:51 PM
I don't try it on os3.1 . To work properly you should copy ppclibrary and other libraries to SYS:libs .(to your system drives's libs drawer.) You probably need the latest setpatch, and ppclibemu or other util to run WARP OS and PUP softwares in the same time. ( Ok maybe not the same time but you don't need to reboot.)
In os3.9 there is an utility in sys:prefs to terminate the ppc card to run warops utils. I dont' know is it running or neccesery under 3.1 .
Title: Re: Blizzard PPC 603e+ /160MHz
Post by: derringer3 on March 26, 2007, 02:21:51 PM
if you missed something try here:

http://phase5.a1k.org/
Title: Re: Blizzard PPC 603e+ /160MHz
Post by: itix on March 26, 2007, 04:13:11 PM
Quote

2) I don't know I to install the PPClibrary ,on the CD in bundle I cannot find any installation tool of this.


IIRC PowerUp software runs out of the box. You dont have to install anything.

Quote

3) And what about Warp OS.At the moment I am running OS3.1 and do not wanna install OS3.9 right now.Do you have any idea how to provide me OS3.1 with Warp OS?


Just download WarpUp (http://aminet.net/biz/haage/WarpUP_V40.lha) archive from Aminet.

Title: Re: Blizzard PPC 603e+ /160MHz
Post by: Daniele on March 26, 2007, 06:09:10 PM
thank you very very much derringer3 and Itix I would try everything you suggested to me.
What a very nice people on Amiga.org, I am very happy!

Title: Re: Blizzard PPC 603e+ /160MHz
Post by: Daniele on March 26, 2007, 06:37:54 PM
Hello,

I'm sorry : when I am going to install Warp Os it says unable to open your tool 'c:/installer'
What should I do?
thx
Title: Re: Blizzard PPC 603e+ /160MHz
Post by: Tomas on March 26, 2007, 06:50:15 PM
Quote
I'm sorry : when I am going to install Warp Os it says unable to open your tool 'c:/installer'

Search and download installer on aminet and copy it to the C drawer in your workbench partition/hd.

And identifier.library probably goes to the libs drawer on your workbench partition.
Title: Re: Blizzard PPC 603e+ /160MHz
Post by: SamuraiCrow on March 26, 2007, 06:51:47 PM
Aminet link (http://aminet.net/util/misc/Installer-43_3.lha)
Title: Re: Blizzard PPC 603e+ /160MHz
Post by: ddniUK on March 26, 2007, 07:11:17 PM
Question: Should Lamborghinis be given to those that can't drive?   :-D  :-D
Title: Re: Blizzard PPC 603e+ /160MHz
Post by: Daniele on March 26, 2007, 08:13:37 PM
I go slow!!!!!!!!!!

it's always a car, don't u think so?

Title: Re: Blizzard PPC 603e+ /160MHz
Post by: derringer3 on March 26, 2007, 08:24:50 PM
@ddniUK: If you ever get Lamborghini, the thing that you can drive or have driving licence will be a subordinate question. :-D
Title: Re: Blizzard PPC 603e+ /160MHz
Post by: CLS2086 on March 27, 2007, 07:13:52 PM
@Daniele : take a look at the GREX page !
The GREX firmware for 1200, got all the updates made for blizzard, and it works even if you don't have a GREX connected. :rtfm: