Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: stopthegop on March 20, 2007, 01:21:33 AM

Title: Which way does the clockport cable go on a Delfina->Buddha?
Post by: stopthegop on March 20, 2007, 01:21:33 AM

Checked through the older threads but all the links to pictures of this connection are dead.  And I don't want to take any chances here!  Can someone tell me exactly how this cable must be connected?  

Title: Re: Which way does the clockport cable go on a Delfina->Buddha?
Post by: rkauer on March 20, 2007, 04:25:29 AM

Did you try Jens (http://www.jschoenfeld.com/indexe.htm) already?

Title: Re: Which way does the clockport cable go on a Delfina->Buddha?
Post by: keropi on March 20, 2007, 06:35:56 AM

as far as I know, on the buddha and kickflash, pin1 of the clockport (where red cable goes to NORMALLY) has a SQUARE solder point on the back side, all others are round.

But I take NO responsibillity for broken hardware because of this!  :lol:  :lol:  :lol:

Title: Re: Which way does the clockport cable go on a Delfina->Buddha?
Post by: thewalrus on March 20, 2007, 10:06:25 AM

Quote from manual "on an Xsurf the red marker must face to the front of the computer. Same as Buddha Flash IDE controller and the VarlO interface board: The red marker of the clockport cable must face to the front of the computer" Just to put a spanner in the works though the Norway USB module goes the other way round if fitting that to a clockport. Hope that is of help regards Chris

Title: Re: Which way does the clockport cable go on a Delfina->Buddha?
Post by: stopthegop on March 20, 2007, 06:04:59 PM

Keropi:  Thats not the case on mine.  At least not on the Delfina.  I know which way it goes on the Buddha because I got my Subway to work on that clockport.  The Subway is now connected (correctly) to my Kickflash - and working.  Now I want to put the Delfina on the Buddha but I don't have the manual for it anymore.  :<   I checked Indiv's site..  Maybe I'm missing something, but I did not find my particular question answered anywhere on the site, just lots of dire warnings against doing it wrongly!