Amiga.org

Amiga computer related discussion => Amiga Software Issues and Discussion => Topic started by: Chain on March 07, 2007, 08:47:19 AM

Title: Warp3D 68k with mediatoru/voodoo3-3000 not running
Post by: Chain on March 07, 2007, 08:47:19 AM

I still have problem to run ANYTHING which uses warp3d on ym 1200T, so maybe someone helps me there before i will wrote to elbox.

specs:
A1200T, blizzard 1240/40
mediator 1200, voodoo3-3000

Ive installed warp3d from MMCD and every demo says no ModeID found :(

I have all modes on in medication/P96, in env is warp3d=yes, all libs are in place i think.
  :madashell:

Title: Re: Warp3D 68k with mediatoru/voodoo3-3000 not running
Post by: Chain on March 07, 2007, 08:49:19 AM

warptest output:

Hardware driver available
Available drivers:
Voodoo 3 Avenger
    Supports format 0x20
    Hardware Driver
    Primitives supported:
   
    Filtering:
   
Voodoo 3 Avenger
    Supports format 0x80
    Hardware Driver
    Primitives supported:
   
    Filtering:
   
Voodoo 3 Avenger
    Supports format 0x20
    Hardware Driver
    Primitives supported:
   
    Filtering:
   
Voodoo 3 Avenger
    Supports format 0x80
    Hardware Driver
    Primitives supported:
   
    Filtering:
   


Error: No ModeID found
Closing down...

---------------

engine output:

Hardware driver available
Error: No ModeID found


----------------
screenshot here (http://chain.3dgrafika.cz/temp/jebka.png)

Title: Re: Warp3D 68k with mediatoru/voodoo3-3000 not running
Post by: Chain on March 07, 2007, 08:54:22 AM

libs:
-warp3d
--gfxdrivers
----w3d_picasso96.library
----w3d_picasso96M.library
----w3d_picasso96MU.library
--hwdrivers
----W3D_AvengerBE.library
----W3D_AvengerBEM.library
----W3D_AvengerBEMU.library
----W3D_AvengerLE.library
----W3D_AvengerLEM.library
----W3D_AvengerLEMU.library

Title: Re: Warp3D 68k with mediatoru/voodoo3-3000 not running
Post by: derringer3 on March 07, 2007, 10:03:11 AM

Which driver version are you using?

Title: Re: Warp3D 68k with mediatoru/voodoo3-3000 not running
Post by: derringer3 on March 07, 2007, 10:07:16 AM

have you tried on 16bit pc mode?

Title: Re: Warp3D 68k with mediatoru/voodoo3-3000 not running
Post by: Chain on March 07, 2007, 12:20:02 PM

Quote

derringer3 wrote:
have you tried on 16bit pc mode?

HOW? do you mean switchin workbench to 16bit?
I think those warp3d demos will run on seperate own screen so it doesnot matter what resolution is used for wb.

Title: Re: Warp3D 68k with mediatoru/voodoo3-3000 not running
Post by: humppa on March 07, 2007, 12:39:52 PM

In Picasso96 you can switch between 16bit PC and 16bit "non-PC" modes. There is a bug in the last Voodoo-driver (4.26?) from Elbox when using non-PC modes, so you better use the 4.23 instead (hope I got the version numbers right).

Title: Re: Warp3D 68k with mediatoru/voodoo3-3000 not running
Post by: TNovosel on March 07, 2007, 02:24:59 PM

@humppa

Yes, I also have problems with last version of Voodoo driver, so I install back old version and now again everything work nice. I think this new version of voodoo driver is only for Voodoo4/5.