Amiga.org

The "Not Quite Amiga but still computer related category" => Alternative Operating Systems => Topic started by: McVenco on February 25, 2007, 01:29:47 PM

Title: Peg 1 issues
Post by: McVenco on February 25, 2007, 01:29:47 PM

Hi,

I've bought a nice small desktop case for my Peg 1 board, but now I'm struggling to get all wires connected. The Pegasos Book (http://www.wikipeg.org//ThePegasosBook/) isn't clear on this at all, so I have no clue as to where I should plug in the wires for the power button, reset button, hdd led, front USB and front mic/phones connectors.

I found this page (http://pegasos.jinak.cz/clanky/specifikace.html) with an pinout-image of the internal 26pin connector, but I can't see which side is which.

Help, anyone? Pictures might help as well.

Cheers,
McVenco

Title: Re: Peg 1 issues
Post by: Piru on February 25, 2007, 01:58:53 PM

In pegasosio.jpg (http://pegasos.jinak.cz/clanky/specifikace/pegasosio.jpg), the PWRON is on right of the connector.

Also, the MorphOS CD should have Docs/PegasosSpecs.pdf which explains the connectors (in which the orientation of the connector is marked with a and b).

Title: Re: Peg 1 issues
Post by: McVenco on February 25, 2007, 09:42:23 PM

Thanks! Found the docs and the case is properly connected now. Now all I need is a harddrive, a monitor, a low level gfx card, a mouse and a keyboard :lol: