Amiga.org

Operating System Specific Discussions => Amiga OS => Amiga OS -- Development => Topic started by: Sidewinder on November 19, 2002, 02:01:44 AM

Title: Installing Louise GCC
Post by: Sidewinder on November 19, 2002, 02:01:44 AM

I'm trying to install Louise's GeekGadgets GCC package on WinUAE, however the hard disk file does not appear to be bootable.  When I load WB using the floppy I can see that the hard file contains lots of goodies and everything appears to be in order, but when booting it brings me immediately to the DOS prompt screen without even entering the startup sequence.  Does anyone have any ideas about how to slove this?  I'm using Amiga Forever, with WinUAE 0.8.22R1.

Title: Re: Installing Louise GCC
Post by: Desolator on November 19, 2002, 02:42:59 PM

Louise's GeekGadgets GCC package? Is that the one that is available both for WinUAE and for the Amiga and is named.. um.. *thinking* gcc.hdf?

If so, then it should work perfectly with WinUAE 0.8.22R1 since that what I run it on. You mount it correctly and all in the HD preference bar in the WinUAE config?

Title: Re: Installing Louise GCC
Post by: Crumb on November 19, 2002, 03:02:33 PM

Be sure to add RTG ram, and in the hardfile select read/write, I also have selected 040.

Title: Re: Installing Louise GCC
Post by: Sidewinder on November 19, 2002, 03:49:05 PM

Thatnks for the ideas, but I am already using WinUAE 0.8.22R1 with 8 meg RTG mem.  I have two PCs that I'm trying to use this on.  One is at work and the other is at home.  The one at work won't boot as described, but when I tried it at home gcc.hdf booted perfectly.  I don't get it sometimes.

Title: Re: Installing Louise GCC
Post by: Desler on November 19, 2002, 05:02:19 PM

You got the proper kickstart images??
Was the file corrupted from download??

Title: Re: Installing Louise GCC
Post by: Sidewinder on November 19, 2002, 05:24:48 PM

I'm using the same kickstart images on both machines.  The kick31.rom that comes with Amiga Forever 5.  I redownloaded the archive to be sure that it was complete and the same things happens.  I can boot into Workbench with a floppy and view the contents of the hard disk and everything appears to be in order, but it will still not load directly from the hard disk on my work machine.   :-?

Title: Re: Installing Louise GCC
Post by: Desler on November 19, 2002, 09:48:24 PM

Hey if you still got problems. Attach the winuae setup in an email and send it to me. Wont promis anything, but ill take a look (Desler@amiga.org ofcourse  ;-) )

Title: Re: Installing Louise GCC
Post by: pjhutch on November 22, 2002, 12:44:33 PM

It may not have a copy of Workbench included in the hardfile. You need the files from:

S, C, L, Devs, T, Prefs, System, Tools, Utilities for it to boot.

Copying the contents of a WB disk to the root of the hardfile should be sufficient.

Title: Re: Installing Louise GCC
Post by: Sidewinder on November 23, 2002, 11:33:18 PM

Thanks all for the help.  I finally figured it out after reading pjhutch's comment.  I checked to make sure that the boot device had all the correct derectories to boot and everything and it turns out that it did not!  Somehow I have selected Window's C drive as the boot device and so naturally it wouldn't boot.  Once I set the hardfile as the boot device it went perfectly.  Thanks for all your help.

Title: Re: Installing Louise GCC
Post by: Themamboman on November 27, 2002, 05:47:11 PM

Quote

Desolator wrote:
Louise's GeekGadgets GCC package? Is that the one that is available both for WinUAE and for the Amiga and is named.. um.. *thinking* gcc.hdf?

I took a look around and couldn't find this.  Where is this found?

Thanks!

Title: Re: Installing Louise GCC
Post by: Sidewinder on November 27, 2002, 05:56:16 PM

You can find the archive here (http://www.innoidea.hu/subsites/amiga/developer/phpwebdev.php).  It's a link at the very top of the page.