Amiga.org
Amiga computer related discussion => Amiga Marketplace => Topic started by: HoodedCrow on January 09, 2007, 06:39:51 PM
-
Hey all,
First time poster, I am looking for anyone that is selling a complete system really looking for an A4000 but would even buy an A1000/2000/3000. I had an Amiga years ago and well it died and I have been looking to replace it for years and I don't wanna do the Ebay thing. So if someone has one they are willing to part with let's talk price.
Hooded Crow
Sysop of The Morgue :-D
updated 01/13/07
-
Well I'm not using my A2000/030 fitted with the 3.1 ROMS required for the later Workbenches OS3.5 and OS3.9. But what is your location?
A4000 Mad
-
I'm just about to offer up an A4000 tower. Specs:
A4000, 2mb CHIP RAM, KS3.1
Microniks tower case
Micronics ZorroIII expander board
WarpEngine040 @ 40MHz c/w 128MB RAM (Cyberstorm 060 is only 13% faster than the WarpEngine...)
HP 2gb SCSI disk (on the Warp Engine on-board SCSI controller
C64/3D gfx card
X-Surf network card
VLAB card
Nexus SCSI-2 card with SCSI CD-RW
Tower case has 6 x 5.25" front accesible drive bays, 4 x 3.5" bays
Expander board has 7 Zorro III slots, 2 Video slots, 5 ISA slots (in line with Z3 slots)
Debating whether to add
DDS-2 DAT drive
second CD-ROM
GG2+ bridgecard (the very card reviewed by me in AUI), to access the ISA slots, plus NE2000 compatible NIC and modem.
This was being prepared for ebay - 10p listing day on Thursday - but if I get a buyer :-)
Whereabouts in the world are you?
-
HoodedCrow wrote:
Hey all,
First time poster, I am looking for anyone that is sell a complete system really looking for an A4000 but would even buy an A2000. I had an Amiga years ago and well it died and I have been looking to replace it for years and I don't wanna do the Ebay thing. So if someone has one they are willing to part with let's talk price.
Hooded Crow
Sysop of The Morgue :-D
Get the amiga you had back then if you want to run the stuff you are used to. I had an a1000 back in the day, a lot of those programs wont run on my a3000.
-
But what is your location?
Using the unique sig as a clue.....
Sysop of The Morgue :-)
... I would put in a guess of New Jersey :-)
Though I may be completely wrong. I have an extra system too if other offers don't work out.
Plaz
-
@HoodedCrow,
Too bad you didn't come to AmiWest last year. They had about a dozen A2000's that all (or most) had working hard drives w/SCSI controllers, for $20.00 each. I almost bought one just for spare parts and chips, but with me already owning 18 Amigas now, I could not justify the space requirement for just one more.
You might try to contact the Sacramento Amiga User Group who were selling them to see if they still have any to sell.
-
@
HoodedCrow
Sorry but your location is too far away from me. But good luck with finding a nice system :-)
A4000 Mad
-
alewis & A4000_Mad
I am in Norfolk Virginia. use to live in florida to hot there had to move to a colder climate. email and anyone else email with price info as well at koirana@cox.net \
Thanx for responding
-
> I would put in a guess of New Jersey
>Though I may be completely wrong. I have an extra system >too if other offers don't work out.
>
>Plaz
Very good guess,
I am originally from Newark New Jersey, infact I ran 2 different Boards from 83 to 92 I ran Telex-T1980, WHQ for RaPiD/TAA, and Fear Factory E/S/PD. from 85 to 92.
Hooded Crow
Sys0p of The Morgue :-D
-
Thanx A4000_MAD, I hope so would be nice to have an Amiga again. I'll let you know if I find on wish me luck :)
Hooded Crow
Sys0p of The Morgue
telnet addy for The Morgue
telnet: morgue.mine.nu
P.S. System has just gone up so it is getting worked on while I was typing this, so there is not much in the way of Messages and files, so if you wanna check it out feel free.
L8r
-
amigadave wrote:
@HoodedCrow,
Too bad you didn't come to AmiWest last year. They had about a dozen A2000's that all (or most) had working hard drives w/SCSI controllers, for $20.00 each. ...
Really? wow, I think I am going to cry.