Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: stefcep on November 29, 2006, 09:05:11 AM

Title: Cyberstorm 68060 wont' work in one A4000 does in the other
Post by: stefcep on November 29, 2006, 09:05:11 AM: Hi i've just tried to install a cyberstorm II 68060 50 mhz with 128 mb fast ram from one A4000D to another A4000D. The first A4000 boots with the 68060, the second doesn't. The second A4000 boots with the commodore 68040 card that it usually has. I have swapped the hard drive from the first A4000 to the second. Both are 3.1 rom machines with OS3.9. Both are revision b motherboards. I can't remember: are there any jumpers to set. i have the latest 68060 libraries on the original hard drive. Any ideas would be appreciated.
Title: Re: Cyberstorm 68060 wont' work in one A4000 does in the other
Post by: Crumb on November 29, 2006, 09:23:52 AM: Did you set up the EXT/INT jumpers correctly?
Title: Re: Cyberstorm 68060 wont' work in one A4000 does in the other
Post by: stopthegop on November 29, 2006, 02:36:45 PM: Try it again. the card was probably just not seated quite right. Phase5 cards are very tempermental with regard to be being fitted just so. Also check for a bent or blocked pins on the cpu slot or on the card. And, of course, the motherboard jumpers as already mentioned: CPU->EXT.
Title: Re: Cyberstorm 68060 wont' work in one A4000 does in the other
Post by: adolescent on November 29, 2006, 03:17:00 PM: IIRC, you use INT for the CSMK2.
Title: Re: Cyberstorm 68060 wont' work in one A4000 does in the other
Post by: stefcep on December 01, 2006, 10:50:54 AM: I am sorry i do not know where to find these jumpers?
Title: Re: Cyberstorm 68060 wont' work in one A4000 does in the other
Post by: X-ray on December 01, 2006, 12:01:42 PM: @ stefcep:

Here is where you can download the manual for the Cyberstorm (Thanks to Jope for the link):

http://phase5.a1k.org/index.php?id=2

(http://i55.photobucket.com/albums/g154/Odd_Job/ManualCyberstormMKII003.jpg)