Amiga.org
Amiga computer related discussion => Amiga Marketplace => Topic started by: neuroflip on November 08, 2006, 08:02:50 PM
-
i need one of thouse to use this (http://www.flickr.com/photo_zoom.gne?id=291571060&context=photostream&size=l) hama 292 genlock.
amiga RGB 23pin to 23pin
Contact with me, please.
Thx.
-
That cable should have accompanied the genlock. Does the seller have it still?
Otherwise I think you have only two options:
1) Buy two of these (http://cgi.ebay.co.uk/AMIGA-COMMODORE-VIDEO-MONITOR-RGB-CABLE_W0QQitemZ330047813196QQihZ014QQcategoryZ4598QQrdZ1QQssPageNameZWD2VQQcmdZViewItem) cables and make the cable from those.
2) Buy a cheap genlock that does come with that cable. For example some time ago I saw a Lola 2000 genlock go for less than £10. I am still kicking myself for not getting it even as spares.
I just don't think that is the sort of cable that people will sell or make on its own.
-
Amigacenter seems to have some left.
-
Ok... i see.
i have emailed amigacenter asking about that cable.... but there are no more people using this who wants to sell a cable?
:-D :-D :-D
[Edited]
but luck!! mail returned from info@amiga.fr because a DNS Error (domain not found)
-
@neuroflip : http://www.amigacenter.com/
"Jean-Jacques Boulet rocks !"
(his ISP is wanadoo.fr, cf on website for his valid email)
-
X-ray wrote:
1) Buy two of these (http://cgi.ebay.co.uk/AMIGA-COMMODORE-VIDEO-MONITOR-RGB-CABLE_W0QQitemZ330047813196QQihZ014QQcategoryZ4598QQrdZ1QQssPageNameZWD2VQQcmdZViewItem) cables and make the cable from those.
and what about the pinout? i think something like that (http://www.flickr.com/photos/84441860@N00/293386676/) will be ok (making it with better care)
-
Aaaahh, the Hama has a female connector?
I didn't think about that.
Edit: no, you won't have to modify a 25-pin connector, because the cable I linked to is already 23 pin. The problem will be if you need male on one side and female on the other.
Can you confirm whether your hama has a male or female 23-pin socket?
-
i'll need one male and one female db23.
female to the amiga,
male to the genlock,
[Edited]
talking about to handmade a cable...
will i need only 5pinout (R+G+B+SYNC+GND)? or connect the whole 23pinout?
-
Sorry mate I don't know.
If I was in your position I would try to get a pin for pin match though.
I don't know how you can get a male 23-pin plug.
-
I just thought: maybe a broken external disk drive that you can take the male connector off?
-
If you can give the pins you want connected, we will make a cable up for you.
We have male and female 23-pin connectors here.
-
Here's what I do....
Find a standard 25pin to 25 pin parallel cable. Male to Male, Male to Female, or Whatever configuration you.
Get a Dremel or Grinder and grind off, on both ends of the the cable, the very last 2 pins. That would be pins 13 and 25.
So...
(http://www.ogoworld.com/23pin.jpg)
I've done this several times and it works great!
AmigaHeretic
-
will i need only 5pinout (R+G+B+SYNC+GND)? or connect the whole 23pinout?
also clk in/out signal and others will be needed for sure
-
Also make sure you use a properly shielded cable or you might get some artefacts on the screen.
-
Hi all,
If anyone of you need a special cable, a special connector
i know the good adress :
DEROTRONIC
37 rue E. Deconynck - 59800 Lille (FRANCE)
Tél : 03 20 30 81 81 - Fax : 03 20 57 86 12
www.derotronic.fr
They make cables themself so feel free to ask them.
-
Hi all,
If anyone of you need a special cable, a special connector
i know the good adress :
DEROTRONIC
37 rue E. Deconynck - 59800 Lille (FRANCE)
Tél : 03 20 30 81 81 - Fax : 03 20 57 86 12
www.derotronic.fr
They make cables themself so feel free to ask them.