Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Louis Dias on October 20, 2006, 04:52:23 PM

Title: How do I get Amiga filesystem recognized by Windows?
Post by: Louis Dias on October 20, 2006, 04:52:23 PM

I have a 2.5" drive (with 2 partitions) with my 3.1 OS installed, but I want to use WinUAE to repartition it and reformat it as a one partition and re-install the OS or atleast run DiskSalv to get rid of my checksum error.

I have a 2.5" external USB enclosure.  Can I get WinUAE to recognize it.  Windows lists the drive in the DEVICE MANAGER but it doesn't give it a drive letter, so I have no access to it.

This drive is from my CD32/SX-1 system.

Title: Re: How do I get Amiga filesystem recognized by Windows?
Post by: krize on October 20, 2006, 06:04:27 PM

You should not use the drive in windows, but only in Winuae.. Add the disk under Harddrives -> Add harddrive -> Select your harddrive :)

Its a great way of setting it up, without having to fiddle with old buggy disks etc.

Title: Re: How do I get Amiga filesystem recognized by Windows?
Post by: Louis Dias on October 26, 2006, 11:31:27 AM

for some reason, it doesn't work
the drive is in the device manager but no drive letter in Explorer and I start WINUAE with the harddrivesafteycheckoff and it only lists my other 2 hard drives

Title: Re: How do I get Amiga filesystem recognized by Windows?
Post by: Colani1200 on October 26, 2006, 11:46:38 AM

Quote

lou_dias wrote:
for some reason, it doesn't work
the drive is in the device manager but no drive letter in Explorer

This won't work because there's no Amiga Filesystem driver for Windows. The only way is to use WinUAE.

Quote

and I start WINUAE with the harddrivesafteycheckoff and it only lists my other 2 hard drives

I have the same problem. I suspect that it simply doesn't work with certain USB adaptors. Maybe you can try a 3,5" -> 2,5" IDE adaptor instead, they're pretty cheap on ebay. It's just a guess that this will work, I haven't tried myself (yet).

Title: Re: How do I get Amiga filesystem recognized by Windows?
Post by: Louis Dias on October 26, 2006, 12:24:20 PM

Quote

Colani1200 wrote:

there's no Amiga Filesystem driver for Windows.

Which is amazing 16 years after FFS was developed...

Quote

Maybe you can try a 3,5" -> 2,5" IDE adaptor instead, they're pretty cheap on ebay. It's just a guess that this will work, I haven't tried myself (yet).

Good advice, thanks!

Title: Re: How do I get Amiga filesystem recognized by Windows?
Post by: Colani1200 on October 26, 2006, 12:33:19 PM

Quote

lou_dias wrote:

Which is amazing 16 years after FFS was developed...

Yeah, but it's crappy Windows after all. Maybe none of the Amigans wanted to develop for it. :-) There are FFS drivers for e.g. Linux and NetBSD, but I think they're experimental and you can only mount FFS partionion r/o. (At least this is the case when I run NetBSD 3.01 on my A1200.)

Title: Re: How do I get Amiga filesystem recognized by Windows?
Post by: Piru on October 26, 2006, 12:42:56 PM

linux affs is far from experimental, and it can write ffs partitions just fine.

Title: Re: How do I get Amiga filesystem recognized by Windows?
Post by: lopos on October 26, 2006, 01:01:49 PM

How do you add your hard drives in WinUAE? :-?

Title: Re: How do I get Amiga filesystem recognized by Windows?
Post by: Thomas on October 26, 2006, 05:09:11 PM

Click on "Add Harddrive".

Bye,
Thomas

Title: Re: How do I get Amiga filesystem recognized by Windows?
Post by: Louis Dias on October 26, 2006, 05:34:29 PM

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ih=020&sspagename=STRK%3AMEWN%3AIT&viewitem=&item=300041366965&rd=1&rd=1

done!

Actually, back in the day, I had an external enclosure that did the opposite and I had a second HD but 3.5" attached to my CD32+SX-1.