Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: JohnFante on September 06, 2006, 08:34:32 PM
-
Does anybody know where you can buy ekstra VRAM for a Cybervision 64 card?
More precisely I was wondering if it is "standard" VRAM that you can buy in your local electronics shop.
I must admit that I have so far been to lazy to check it out my self.
Thanks in advance!
-
I went to a PC junk store and used some chips from an old PC VGA card 4MB, the ones that have 2MB soldered on board and 2MB in sockets. Works great!
-
Buy an old 4mb s3 virge pci or similar off ebay.. you should be able to pop out half the mem.. They usually have half soldered and half socketed..
-
Hmmm it feels like Deja Vu.
-
Thanks!
Did a little searh on ebay. But so far no luck finding cards that have socketed VRAM. All is soldered.
If anybody here has 4x512KB VRAM i would be very interested.
Thanks in advance!
-
This is the sort of thing with them soj memory chips..
Ebay (http://cgi.ebay.co.uk/S3-Trio64V-PowerGraph-PCI-Video-card-TVCS-107_W0QQitemZ290028105489QQihZ019QQcategoryZ27388QQssPageNameZWDVWQQrdZ1QQcmdZViewItem)
-
Wrong type but close you want a card that has 2MB onboard with 4 more sockets for 2MB more...
http://amiga.resource.cx/photos/cybervision64.jpg
-
I have 2 MB Ram from the original Cybervision64.
If you want, contact me.