Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Rod_cl on August 09, 2006, 03:11:13 AM
-
Hi:
i'm having an odd problem with a cybervision 64 3d.
After a couple of months without having time to find out what happened to my amiga 3000, i dismantled it yesterday. I took everything apart and built it together afterwards.
That's the point where i realized that the cybervision 64 3d was not being recognized by the early startup menu. I thought that there could be a contact problem, reinserted the card, nothing. Another zorro slot, nothing.
After that i tested it on my A4000, again the only result was that, depending on the zorro slot, all the other zorro cards were "erased" from the e.s.menu.
Any ideas what could be the problem.
Best Regards
-
I think thatis a contact problem
clean the contacts of the cybervision with something good like isopro- alcohol or another good product
check again with good light the contacts of your gfx card for dirty or another issue insert the card again
I had identical problems with a geforce card on my pc...crashes and not recognized....solved after cleaning contacts
bye, Laser