Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: nahoo7 on July 28, 2006, 09:04:01 AM

Title: networking an a2000?
Post by: nahoo7 on July 28, 2006, 09:04:01 AM
gday all,
I wish to add my a2000 to my network,is their a guide around to do this that i can download.
I have a golden gate 386 bridgeboard and an isa network card but I am not sure what do next.
Do I have to add all the hardware to get windows 3.1 up and running on the machine first or just have the bridgeboard in the machine with isa network card and install certain software to get it running.
many thanks.
Title: Re: networking an a2000?
Post by: patrik on July 28, 2006, 09:31:41 AM
@nahoo7:

If you have the Sana-II driver for your setup working, check this AmiTCP installation guide (http://www.acc.umu.se/~patrikax/amiga/guides/AmiTCP_Install/) out.

What bridgeboard, exactly, is it you have?


/Patrik
Title: Re: networking an a2000?
Post by: nahoo7 on July 28, 2006, 09:59:32 AM
Ihave a vortex goldengate 25 mhz 80386sx bridgeboard
Title: Re: networking an a2000?
Post by: Colani1200 on July 28, 2006, 10:10:47 AM
You could try Etherbridge (available from aminet) in conjunction with your favourite TCP-stack (e.g. AmiTCP). However, the Etherbridge readme only mentions Commodore bridgboards (A2088, A2286, A2386), so I am not sure if it will work with the Vortex. It's worth trying though...  ;-)
Title: Re: networking an a2000?
Post by: nahoo7 on July 28, 2006, 10:18:56 AM
okay thanks very much for that will give it a go.
Do I have to load any of the bridgeboard software or just have it inserted into the a2000.

Title: Re: networking an a2000?
Post by: Colani1200 on July 28, 2006, 10:25:43 AM
You might want to search the net for some kind of tutorial. From what I've seen, the installation is not quite trivial.  :roll:
Title: Re: networking an a2000?
Post by: nahoo7 on July 28, 2006, 10:35:48 AM
okay thanks for the reply,
I seem to remember that there was a program that would allow the use of an ne2000 or compatible card in an a2000 without the need of a bridgeboard.
But I may have been dreaming at the time ,many thanks.
Title: Re: networking an a2000?
Post by: Colani1200 on July 28, 2006, 10:46:08 AM
Sure you can. However, you'll need to get your hands on an NE2000 card with Zorro-II slot.   :-)
Title: Re: networking an a2000?
Post by: nahoo7 on July 28, 2006, 10:55:27 AM
Fair enough I will see how I go with what I have at the moment before investing in any more hardware.
thanks for all your help.
regards nahoo7
Title: Re: networking an a2000?
Post by: Oli_hd on July 28, 2006, 12:02:46 PM
You are probably talking about the GoldenGate card which activated the ISA slots for use by the Amiga.
Its a very old card now, although I guess so are ISA cards. :-)
The best place to look for one is Ebay.
Title: Re: networking an a2000?
Post by: nahoo7 on July 28, 2006, 12:25:20 PM
I was just hoping it would let the amiga access the isa slots as the ne2000 and the bridgeboard takes up the 2 isa slots and I dont have a graphics card that can utilize the either the remaining zorro ll slot or the 8 bit slots.
Title: Re: networking an a2000?
Post by: leofoe on July 28, 2006, 01:07:29 PM
The Commodore bridgeboards come with an install disk that installs the janus.library in the Expansion drawer and some programs in the PC drawer to start the PC. It does not matter what you install first: the bridgeboard or the software.
I do not expect the etherbridge network (http://home.arcor.de/kickstart/TKA/Tutorials/bridgeboard/index.html) to function with the Goldengate. Sorry, German only.
Title: Re: networking an a2000?
Post by: nahoo7 on July 28, 2006, 07:58:51 PM
great thanks for that info.
Title: Re: networking an a2000?
Post by: DamageX on July 29, 2006, 12:15:26 AM
Some ISA VGA/SVGA cards will work in an 8-bit (XT-bus) slot, so you might want to give that a shot if you don't have 8-bit bus video cards on hand.
Title: Re: networking an a2000?
Post by: nahoo7 on July 29, 2006, 06:30:06 AM
okay thanks I will try that as well.