Amiga.org

Amiga computer related discussion => Amiga Software Issues and Discussion => Topic started by: tolishot on June 30, 2006, 06:12:48 AM

Title: How to setup the bvppc card in 1200???
Post by: tolishot on June 30, 2006, 06:12:48 AM

how to setup the blizzardvisionppc vga card in 1200?
the steps of software install and how??
help?? :-?  :-?  :-?

Title: Re: How to setup the bvppc card in 1200???
Post by: HellCoder on June 30, 2006, 06:26:07 AM

Do you mean inside the original desktop ?
Or just a general installation of the BVision ?

Title: Re: How to setup the bvppc card in 1200???
Post by: keropi on June 30, 2006, 06:36:13 AM

it is very easy... attach it to your bppc and then just install CybergraphX , reboot , go to prefs->screenmodes and select a BVISION screenmode... and you are set!  :-D

Title: Re: How to setup the bvppc card in 1200???
Post by: tolishot on June 30, 2006, 06:42:46 AM

i run the cybergrfx.install in menu the bvppc.
reboot and i run screen modes and picasso96 program.
both programs did not reqognize the card but in out of bvppc on my vga monitor work in low resolution(31khz default screen).
what to do? :-?  :-?  :-?

Title: Re: How to setup the bvppc card in 1200???
Post by: motorollin on June 30, 2006, 08:33:03 AM

Sounds like you have both CyberGFX and Picasso96 installed? If so, then that could be your problem. You should remove P96.

--
moto

Title: Re: How to setup the bvppc card in 1200???
Post by: tolishot on June 30, 2006, 09:44:02 AM

how to uninstal p96?or some trick to work both programs and
 voodoo3 and bvppc? :-?

Title: Re: How to setup the bvppc card in 1200???
Post by: lopos on June 30, 2006, 09:45:44 AM

Just start P96 install file and tick uninstall.

Title: Re: How to setup the bvppc card in 1200???
Post by: CLS2086 on June 30, 2006, 10:15:58 AM

Hi,
also take time to check if you have at least a  good 160W PSU, the lastest BPPC bios, CGX4 + update,...  ;-)

Title: Re: How to setup the bvppc card in 1200???
Post by: tolishot on June 30, 2006, 11:28:08 AM

bvppc update????hmmmm!its a good idea!!
link for download?i have 300w atx psu enlight!!!its a strong psu!when i flashing bvppc card i have something better in card??the problem is cooling in this card!i put under mediator busboard.its no space in two cards!i put on bvppc card a aluminium cooler from pc mainboard chipset its to slim and stuck on chip.but is still very hot! :getmad:  :getmad:  :getmad:

Title: Re: How to setup the bvppc card in 1200???
Post by: amigagr on June 30, 2006, 03:48:55 PM

power up (http://powerup.amigaworld.de/index.php?lang=en&page=14)