Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: lillPiP on June 29, 2006, 05:07:41 PM

Title: CV64/3D in A2000 problems
Post by: lillPiP on June 29, 2006, 05:07:41 PM

Hi!

I have a A2000 rev.6.2 with a PPS 2000/040 accelerator with 32 MB ram and a CV64/3D and a GVP SCSI-controller and a AmigaNet card.

I installed the CV64/3D yesterday and has met some troubles. The Enforcer is installed and executed from the startup-sequence and the card is installed in the first slot nearest the cpuslot according to the manual.
But, after the system has booted up OS3.9 I get a screen and everything is fine. Using the CLI is OK, but here is my problem; opening a drawer makes first the mouse goes slowly and then the system freezes and then it reboots. What can be the problem? I didn't had any problems before installing the CV64/3D. And I only has 4 MB of ram in the ZorroII-limit except the CV64's 4 MB.

Title: Re: CV64/3D in A2000 problems
Post by: tolishot on June 30, 2006, 07:03:31 AM

install latest cybercfx program?
testing with a picasso 96!
and take of the vga card and clean the contacts in your card.
fixing some problems!the contact will be clean with ..?xmm
the word i find just a moment!xmmm.. with a clean goma if you know pencil and deleter(goma).with this little stuff i clean
all of my cards in a4000 and 1200 also nad pc!very usefull
!! :rtfm:  :rtfm:  :idea:  :idea:

Title: Re: CV64/3D in A2000 problems
Post by: Chain on June 30, 2006, 11:19:20 AM

guma=rubber

Title: Re: CV64/3D in A2000 problems
Post by: lillPiP on June 30, 2006, 09:56:51 PM

Well installed CGX4 + an update disk and so far (for 15 min) it seems to work =)
Hope it will work now =)

Title: Re: CV64/3D in A2000 problems
Post by: keropi on June 30, 2006, 10:05:03 PM

yeah, cgx rox....