Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: thewalrus on June 29, 2006, 10:12:32 AM

Title: Guru Rom V6 device driver Wanted!!
Post by: thewalrus on June 29, 2006, 10:12:32 AM

I have obtained a GVP 4008 with a Guru Rom V6 onboard however It came without the install disk. Can anybody help me out with the software or device driver. Thanks in advance.

Title: Re: Guru Rom V6 device driver Wanted!!
Post by: Flashlab on June 29, 2006, 10:28:08 AM

Check amiga.resource.cx

There are drivers for many hardware boards there...

Title: Re: Guru Rom V6 device driver Wanted!!
Post by: neuroflip on June 29, 2006, 10:58:59 AM

i don't know about Guru Rom v6, but i read this at aminet docs/rview/GuruROM.txt (http://uk.aminet.net/docs/rview/GuruROM.txt):

Quote

SOFTWARE INSTALLATION

   The most important piece of software, the driver, is located in the
ROM chip, so there is no further installation necessary.

   The utility and configuration software for advanced use on the
installation disk can be used right from the disk or copied manually to your
hard drive using Workbench or the Shell.

   The configuration of all your software that uses the SCSI driver
directly has to be changed, because the new driver is called
"omniscsi.device" instead of "gvpscsi.device".  This affects for example
DOSDrivers or Mountlist files, low-level disk utilities like HDToolBox or
SCSI-direct software like CD-DA players.

sorry, nothing more than that  :angry: