Amiga.org

Amiga computer related discussion => Amiga Software Issues and Discussion => Topic started by: tolishot on June 29, 2006, 08:20:08 AM

Title: demos ppc exceptions!!!
Post by: tolishot on June 29, 2006, 08:20:08 AM

please help!!i put latest warp3d 4.2a and warpos 5.1 on my a1200 ppc.when i run some demos ppc like planet potion,option,and some other ppc demos shows exception pages
with message memory protection ,error task 1 cli1 or cli4 with some other number f1-f4
f5-f7.....
what can i do?help me!! :-?  :-?  :-?  :getmad:  :getmad:  :getmad:

Title: Re: demos ppc exceptions!!!
Post by: Lando on June 29, 2006, 08:24:13 AM

What is your gfxcard? You have BVision?  Does other Warp3D stuff (Gears demo, Quake) run ok?

Title: Re: demos ppc exceptions!!!
Post by: CLS2086 on June 29, 2006, 08:26:58 AM

Hi,
do you have a BVision or GREX+Permedia 2 card for Planet Potion ?
did you have installed the right specific release of W3D and WOS for your system card ?
do you own a GREX ? a Bvision ? a Mediator ? a Z2/3/4 bus ?

Title: Re: demos ppc exceptions!!!
Post by: tolishot on June 29, 2006, 08:36:30 AM

thanks for reply guys!!my hardware is:
a1200 elbox tower
roms 3.1
blizzard ppc 603e
128ram
mediator 1200sx
fast ata ide
voodoo3 3000
sb 128 pci
software:
os3.9 with boing bug 3.9.1 and 3.9.2
picasso 96 latest
warp3d 4.2a
warpos 5.1 update
mui 3.8
 :angry:

Title: Re: demos ppc exceptions!!!
Post by: Crumb on June 29, 2006, 08:56:24 AM

@tolishot

AFAIK Planet Potion doesn't run with Voodoos

Title: Re: demos ppc exceptions!!!
Post by: tolishot on June 29, 2006, 08:59:56 AM

are you sure for that?planet potion dont run with voodoo cards?
and the other demos?
the same?
and the a4000 if i put the voodoo card? :-?  :-?

Title: Re: demos ppc exceptions!!!
Post by: tolishot on June 29, 2006, 09:03:53 AM

can i put both voodoo3 and the bvision ppc? :idea:

Title: Re: demos ppc exceptions!!!
Post by: kas1e on June 29, 2006, 10:01:59 AM

Yes, you can put both (as i do). And make 2 different boot partitions: one for mediator/voodoo3, and one for bvision.

What about planetpotion and other ppc/warp3d demos from 'potion' , you need a bvision/cvision only. Becouse in this demo, hardcoded values for 15bit screens i think (which supported by bvision only). Also, i can said that warp3d driver for bvision and for voodoo3, have tons of differens, and for example if prod will works ok on bvision, on voodoo3 you will have sometimes problems with poligons and colours.

So, for me best way have both (voodoo3/bvision) at the same time. It works fine.

btw, here is ppc demos realted site, mostly is warp3d. You can browse the 'requirements' in download sections, and see, where it was tested and how it works. http://ppcdemodb.acggbg.org/