Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: tolishot on June 26, 2006, 08:51:01 AM

Title: a1200t ppc 603e warp3d problem
Post by: tolishot on June 26, 2006, 08:51:01 AM

help me!on warp3d program if run the gears ppc he shows the white screen and stucks there.
in demos ppc he shows expeption error ppc task 4
download latest ver warp3d.the same problem.
some messages:1)80000020.2)8000004.????
tell me what to do?
my hardware is:
a1200t
ppc 603e
128mb ram
2 coolers on cpu's
os 3.9
2 updates os 3.9
mediator pci 1200 sx
voodoo3 3000
sb 128 pci
 :pissed:

Title: Re: a1200t ppc 603e warp3d problem
Post by: CLS2086 on June 26, 2006, 09:40:57 AM

Bad libs !!
Checks :
WarpOS 5.1 -> Terminator : 2 , Voodoo @dress ??
Warp3D 4.2a -> Voodoo @dress ??
040/060 libs (1999 or 2000)

Buy the GREX of Keropi !

Title: Re: a1200t ppc 603e warp3d problem
Post by: tolishot on June 26, 2006, 11:10:08 AM

thanks for reply!where i download this files?
warpos 5,1
warp3d 4,2a
tell me also how to setup the voodoo address!
thanks! :idea:

Title: Re: a1200t ppc 603e warp3d problem
Post by: Boot_WB on June 26, 2006, 11:16:52 AM

Run the mediator config program from your Multimedia CD, or download it from Elbox.com.  That will set the graphics address for your Voodoo.

Regards



Rich

Title: Re: a1200t ppc 603e warp3d problem
Post by: keropi on June 26, 2006, 11:57:54 AM

Quote

Buy the GREX of Keropi !

LOL, nice one  :-D

Title: Re: a1200t ppc 603e warp3d problem
Post by: tolishot on June 26, 2006, 02:01:08 PM

keropi poulas g-rex?
poso tin deineis?
tolishot@computerkey.gr
a1200t
ppc 603e
128mb ram
mediator 1200 sx
os 3.9
voodoo4 4500
sb 128
tv card :-P  :rtfm:

Title: Re: a1200t ppc 603e warp3d problem
Post by: x56h34 on June 26, 2006, 02:12:41 PM

I think that you ran out of video memory. Decrease your  screen type to a 16-bit screen-mode (supposing that your current one is a 32-bit one), and remove any backdrop that you may have, reboot, and try running Gears again.

Title: Re: a1200t ppc 603e warp3d problem
Post by: keropi on June 26, 2006, 02:18:04 PM

Quote

tolishot wrote:
keropi poulas g-rex?
poso tin deineis?
tolishot@computerkey.gr
a1200t
ppc 603e
128mb ram
mediator 1200 sx
os 3.9
voodoo4 4500
sb 128
tv card :-P  :rtfm:

currently it is reserved for an EAB member... sorry man...
then it is Amigaz and then you if u are interested... the price is 60euro

Title: Re: a1200t ppc 603e warp3d problem
Post by: tolishot on June 26, 2006, 02:21:06 PM

thanks for reply!i try to use 16bit but the same problem!
run the medication to change the voodoo settings and shows
 exeption 800000020.also the demos ppc white screen and stucks.
libs?
tell me some link to download the oxypatcher?
 :-?  :pissed:  :madashell:  :idea:

Title: Re: a1200t ppc 603e warp3d problem
Post by: Boot_WB on June 26, 2006, 03:04:47 PM

Can't find the oxypatcher link at the moment, but one other thing:

Look at the report produced by the mediator config program.

Make sure you only have the Amiga 1200 - No MMU versions of the Warp3d libraries.

Title: Re: a1200t ppc 603e warp3d problem
Post by: CLS2086 on June 26, 2006, 03:12:41 PM

Set your WB @t 16 bits 1024x768x60Hz, then try 68k test Warp3D It would help to determine if it's a W3D installation problem or a PPC lib problem.
Check also the version of your libraries :
CLI
cd C:
version thelibraryyouwanttoknow
then post them here

You can also try to install the GREX bios which content most of the good updates.

Which patch did you install in your startup-seq, and what have you in the BB2 ROM Update file

Title: Re: a1200t ppc 603e warp3d problem
Post by: tolishot on June 27, 2006, 06:20:44 AM

i dont have grex card.i have a mediator 1200sx.
i try to setting 800x600 16 bit.after that run the gearsppc
demo from w3ddemo.white screen again but!!!inside of the white screen flashing rotate the item.and with esc button  exit
from the gearsppc.before 2 days this aplication stacks end reset.i have the warp3d4.2a on it.i hope the last thing is i install the warpos 5.1 if i find !i hope!some link to download
 the latest warpos 5.1? :idea:  :-?

Title: Re: a1200t ppc 603e warp3d problem
Post by: tolishot on June 27, 2006, 06:34:20 AM

keropi?i want the grex card tell me the details to buy it!
tolishot@computerkey.gr :-D