Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: neuroflip on June 16, 2006, 03:04:10 PM
-
i read at http://www.g-mb.de/pcmcia_e.html that only NetGear MA401 and MA311 are suposed that are fully functionaly at amiga systems....
Can i use another 16 bits PCMICIA card or only Prism Chipset is supported? :-?
thx!
-
Read the documentation which comes with the Prism2 driver (http://aminet.net/package.php?package=hard/drivr/prism2.lha).
/Patrik
-
I see that orinoco silver is supported by the prism2 device.
Anyone have an opinion about this pcmcia card? i have located one... how much would you pay for that?
thx.
-
I paid little less than 30eur for a card with orinoco chipset (2wire). It works fine. Make sure its 16bit, 5 Volts.
OTOH wired LAN card has its advantages over WiFi..
-
orange wrote:
I paid little less than 30eur for a card with orinoco chipset (2wire). It works fine. Make sure its 16bit, 5 Volts.
Yes it's 16 bits 5v
orange wrote:
OTOH wired LAN card has its advantages over WiFi..
What do you mean?
thx.
-
It sure is cheaper, and maybe a bit faster.
I don't know, somehow UTP cable seems more reliable to me, no interference, noise.. etc.
IMHO, wifi is best suited for laptops because of portability.
-
Ok sure.
But i need less cables and a bit of order :-)
thx for all!
-
Sorry i don't want to be a little repetitive but.... what about this?
ZyAir B-120 (http://www.zyxel.hu/products.php?cid=20&id=107)... prism2 guide not talk about this card, but googling i have read that it's fully compatible with prism2 drivers... :-?
can be?
-
It is very likely that a lot more cards could be compatible with prism2 drivers. If you happen to find a working card not mentioned in the driver doc, don't forget to contact the great Neil Cafferkey to update the doc.
-
I use an Orinoco with an A1200 and it's rock solid!