Amiga.org
Amiga computer related discussion => Amiga Software Issues and Discussion => Topic started by: irishmike on June 07, 2006, 02:08:53 AM
-
Hi all:
I have the drivers all copied onto my A1200 for my Etherlink III PCMCIA card and I am guessing that the file is corrupt or I am missing something.
When I run the "Installer" in the folder, the system kicks back "Unable to open your tool 'Installer'" with Retry and Cancel buttons.
Is there something I need to do to make this script executable that I am missing?
This is a 3c589 and I am using the driver package from 3c589.lha.
Thanks,
-
Download this (http://www.aminet.net/package.php?package=util/misc/Installer-43_3.lha) and copy Installer to your C: or SYS:Utilities directory.
Or manually install your ethernet drivers by copying 3c589.device to Devs:Networks and pccard.library to Libs:
Probably best to do the former since it'll save a lot of headaches later on.
-
@Matt H
I did copy the files into the DEV and Lib as you mentioned
@everyone
I have tried installing AMITCP and it can't seem to load the network so I am not sure how to get around it. The problem is that there is no domain name on my network really. But it has trouble reaching the network according to the AmigaDOS window that is running.
I guess I need a pointer or two for how to configure this properly.
Thanks,
-
After adding the Library to LIBS the AmigaDOS window now comes up but I am stuck with [CLI 1]... not sure what to do to get rid of the AmigaDOS window.
-
@irishmike:
Follow this (http://www.acc.umu.se/~patrikax/amiga/guides/AmiTCP_Install/) guide to the letter and you will have a working AmiTCP installation. The only thing you will have to do different than the examples there is that you should use 3c589.device instead of cnet.device. Btw, remember that the interface-name can not contain any digits, so do not name it 3c589! Instead just let it be named ether as it is to start with.
Btw, regarding domain-name, it does not matter what you type in there, you could write irishmikesdomain.com. It will only per default try to complete hostnames without a domain-ending with that name - so if you try to access the host sven, it will first try to access sven, then if that fails - sven.irishmikesdomain.com.
/Patrik
-
@patrik
Thanks. This looks like it will help. I think I went wrong on the install by trying to copy the files onto the install directory. I have version 2.2 on the Amiga currently... had to go to a friends to copy it over to an Amiga formatted disk, but the install script looks the same and I imagine that it will work better if I try again using that guide.
@everyone
Once I get a good working TCP... will it be easier to just FTP everything from my Linux box from the Amiga or what method would you use to get your files over to the Miggie once networking is enabled?
Thanks,
-
@irishmike:
A lot of networking software needs atleast AmiTCP 3.0 to work so use 3.0b2 instead of 2.2.
Imho, the best thing would be to use NFS (see help/ch_nfsc in the AmiTCP 3.0b2 archive (http://www.funet.fi/pub/amiga/gnu/tcpip/AmiTCP-bin-30b2.lha)) or smbfs (http://aminet.net/package.php?package=comm/tcp/smbfs.lha).
Both of these allows you to mount shares from your linux pc like regular volumes on your Amiga with an icon poping up on your Workbench, allowing you to access files over the network just like they were a local harddrive - much more convenient than having to first download files with a ftp-client before using them.
I use smbfs, but that is mostly because samba already is running on my linux pc to enable me to mount its shares on my windows pc.
I use the following two lines in a script-file to mount my homedir from my linux pc (192.168.0.1):stack 65536
C:smbfs workgroup=megaburken.net user=patrik password=xxxxxxxx service=//192.168.0.1/patrik device=SMBFS0: volume=Megaburken: quietYou ofcourse have to change workgroup, user, password and service to match the settings of your linux pc.
/Patrik
-
@patrik
That is well and good, the problem is I prevailed upon a friend to get my NIC card drivers and AmiTCP (2.2) which I downloaded to an Amiga formatted disk for my A1200... I have to get the TCP stack working under that version and then I can bring over the other files (which reside on my Linux box) in the matter which you suggest. The problem is getting the 3.0b2 archive to my Amiga -- I have been waiting 2 weeks to get what I have copied over. Hopefully I can get 2,2 up and running and then make changes.
@everyone
Would be able to accomplish this if I had my SCSI CD writer hooked up. The main problem is the cost of the SCSI adapter and I really either need my networking up and running or the CD writer hooked up. Anyhow, appreciate any help offered.
-
You don't happen to have any DD diskettes (the ones with only the write-protect hole)? If not, get a regular HD diskette and tape over the hole on the opposite side of the write-protect hole. The HD diskette will most likely not work well very long as a DD diskette, but it will suffice to transfer a file.
When you have fixed a disk, doubleclick on Storage/Dosdrivers/PC0 on your workbench-partition and you will be able to read/write pc-formatted disks.
Under most OS:es on a PC, it is a bit tricky to format a DD diskette, so just insert it in the Amigas drive and doubleclick on System/Format on your workbench-partition. In that program, select PC0: and format it.
You can fit 720kB on a pc-formatted DD-disk and as the AmiTCP 3.0b2 archive only is 686kB, there will be no problems fitting it.
/Patrik
-
@patrik
I am trying the Floppy idea right now. It seemed that they were all formatted under Windows NT (the DD's I have) and Linux puts Fat32 formats on them. My OS 3.0 WB didn't read them IIRC. But I think I have a couple that were truly formatted in DOS. So I will give it a try.
This leaves one thing. I need to remove the botched install of 2.2 any ideas?
-
@patrik
As I remembered, on my A1200, PC formatted floppies only come up as DF0:???? and can not be read. Probably no CrossDOS on her.
Definitely need to remove the old 2.2 Installation though.
-
@irishmike:
WB3.0 comes bundled with CrossDOS, but it is not activated per default.
Read what I wrote in my previous message - to be able to read/write PC-formatted disks you need to doubleclick on the "PC0" icon in the Storage/Dosdrivers/ drawer on your Workbench-partition! This will activate CrossDOS. If you want it to always be activated, move the "PC0" icon to the Devs/Dosdrivers/ drawer on your Workbench-partition.
Read the rest of my previous message again to see how to format the disk on your Amiga.
To remove AmiTCP 2.2, open your S:User-Startup file in a text-editor, find the AmiTCP section and remove it. After a reboot, remove the AmiTCP-drawer from where you put it during install. Thats all there is to it.
/Patrik
-
@patrik
We'll give her another try :-) I do appreciate the help BTW ;-)
-
@patrik
We're off and running. I am now in the process of installing AmiTCP via your guide. Thanks for the help!
-
@patrik
The installation is working on the Amiga now. Many thanks to your help :-)
Now can we please go back to how to mount my Linux box on my AMI? You said that we could do it using NFS... Which I prefer since I do not have a windows box anywhere and therefore I do not believe that I have setup Samba on the Linux box... the daemon loads, but I am sure I have never configured it.
Could you talk about writing scripts a bit? Is this just open ed and write the lines and then run him, or is there more to it? Do you have an example of how to do the NFS side.
Appreciate it.
-
@irishmike:
Cheers! :-)
To use NFS, you don't really need any script, but you need to edit the settings in the file AmiTCP:db/ch_nfstab, which also contains help/instructions and examples of how to mount volumes. If more detailed info is needed, read AmiTCP:help/ch_nfsc. Disregard the install-instructions, as the nfs-client is already installed, just create a line like the one starting with nfsserver:, but which suits your linux-system. After that, just mount the unit you specified on that line with ch_nfsmount.
If you want to make a script, just open ed and write in the stuff, then either execute it by typing in "execute nameofscriptfile", or set the files scriptfile by typing in "protect nameofscriptfile +S".
If you want it to mount a nfs-volume each time you start, you could just write in a suitable ch_nfsmount-line at the end of your AmiTCP:bin/startnet with a Run >NIL: before ch_nfsmount (on the same line).
/Patrik
-
@patrik
I was also wondering since I did download the SMBFS file you specified, where does that get installed? The archive did not seem to have any good directions within it.
That may be the easiest way to get the share going.
Thanks for the input so far as well.
-
Actually, I feel it is time to start a new thread because technically the network is now up.
Thanks to all, especially Patrik.
-
@irishmike:
Just put smbfs in C: (the C drawer on your Workbench-partition) or AmiTCP:bin/.
(edit):
It is not that hard getting nfs working in AmiTCP. First, on your linux-computer log in as your regular user (not root) and execute the command id and note which uid and gid numbers your user have. Then edit your current user in AmiTCP (the one you added during install) to have the same uid/gid - this is located in the AmiTCP:db/passwd file and uid is the third column from left and gid is the fourth column from left.
When that is done reboot your Amiga.
Now I will assume that your linux pc has ip-number 192.168.0.1, that your Amiga has ip-number 192.168.0.2, that your homedir for your regular user on your linux pc is /home/irishmike (the one you got the uid and gid numbers from) and that your user in AmiTCP is called amitcp_mike
Now to be able to mount your homedir on your Amiga, first you must allow the Amiga to mount it from your linux pc - edit the file /etc/exports on your linux pc and enter the line:/home/irishmike 192.168.0.2(rw)
Now the Amiga is allowed to mount that directory, and you only have left to create a mount-line for it in AmiTCP:db/ch_nfstab. It should look something like this:192.168.0.1:/home/irishmike linuxhomedir: USER amitcp_mike UMASK 0755
You will ofcourse have to substitute 192.168.0.1, 192.168.0.2, /home/irishmike and amitcp_mike with what is true for your configurations.
Now to mount that homedir on your Amiga, just enter "ch_nfsmount linuxhomedir:" in a shell.
/Patrik
-
thanks for the help all :-)