Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: mrtabaka on April 25, 2006, 11:53:31 AM

Title: A3640 + A3000T
Post by: mrtabaka on April 25, 2006, 11:53:31 AM

Hi, I'm trying to put a3640 rev 3.1 from Amiga Tech in my A3000T kick 3.1 Buster 7, 2mb CHIP, 16mb FAST and it doesn't work. Can somebody describe working jumpers places? I tried set clock to EXT but no result;(

Title: Re: A3640 + A3000T
Post by: dnelsonfl on April 25, 2006, 04:29:08 PM

@mrtabaka,

Read this page (http://www.l8r.net/technical/t-a3640.shtml) for plenty of information on the A3640 and A3000, including the jumper settings.

-David

Title: Re: A3640 + A3000T
Post by: amigagr on April 25, 2006, 05:27:39 PM

J100: 3-4
J102: 2-3
J103: 1-2
J104: 2-3

The '1'-Position is where the printed arrow head is.
Do not change any jumper on the A3640 board itself!

Title: Re: A3640 + A3000T
Post by: mrtabaka on April 26, 2006, 12:11:31 PM

I'll try. My DMAC is 02, BUSTER 07 and RAMSEY 04, kick 3.1. It's enough? Funny that when I use 030 I have to set :

j100 1-2
j103 3-4
j102 2-3 !!!
j104 1-2 !!!  

if I put j102 and j104 1-2 is no boot..