Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: AmigaMance on March 31, 2006, 01:18:42 PM

Title: small Dial-up tips?
Post by: AmigaMance on March 31, 2006, 01:18:42 PM

  Hello.
 If you know any small dial-up tips that offer even a tiny boost in the performance of the connection, please post it here.
 From hardware advices to tcp/ip settings and InitStrings.
  Thank you in advance.

Title: Re: small Dial-up tips?
Post by: zefiro on March 31, 2006, 04:13:53 PM

When I used to go online with my USRobotics 56k Voice Faxmodem
I used, after several experimentations, this InitString:

AT&F2L0&H1&I0&R2&C1&D0W2S2=0/r

For me That's rocksolid!!

Title: Re: small Dial-up tips?
Post by: AmigaMance on April 01, 2006, 05:11:23 PM

Thanks zefiro.

 I'm making this bump in case someone missed this thread.

Title: Re: small Dial-up tips?
Post by: zefiro on April 01, 2006, 07:58:14 PM

That init string is my personal experimentation and works well
on my modem. So let me know if that works well also for you or
someone else. Cheers

Title: Re: small Dial-up tips?
Post by: AmigaMance on April 01, 2006, 08:21:38 PM

@zefiro
 Hmm, just tried it and my modem doesn't accept it. But i know why this happens, it's because my modem is based on a different chipset from the one that USR's are based. So the AT commands are incompatible.
 Most non-USR modems are based on the Rockwell and Lucent chips which are not compatibles.

Title: Re: small Dial-up tips?
Post by: zefiro on April 02, 2006, 08:31:36 AM

Try removing S2=0 because I think it's a specific chipset command

Title: Re: small Dial-up tips?
Post by: AmigaMance on April 02, 2006, 06:31:46 PM

 Nope. That didn't do it.