Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: ckillerh3 on March 12, 2006, 11:34:34 PM
-
Help -
I've found trying to use AmigaExplorer ( Cloanto Amiga Forever WinUAE) through a standard Amiga serial port is VERY SLOW !
I've acquired a hyperCOM3 card with no driver disk
however do have hyperCOM3.device in the DEVs subdirectory.
I am in need of vmcresource.library however and think the card will not initialize without this file? Anyway when I modified the script to start AmigaExplorer SerDev = hyperCOM3.device I get the error "can not open serial port".
The hyperCOM3 connects to the A1200 clock port. Pin #1 is down on the PCM-CIA side of the motherboard, but the instructions I downloaded indicate that the cable / red stripe must be connected to the "top" side nearer to the
150-pin accelerator board connector. IS THIS CORRECT?
I hope so ! That is the way I connected it up. Is anybody running AmigaExplorer through the HyperCom3 card?
How did you modify the start-up of AmigaExplorer? Thanks for any help.