Amiga.org

Amiga computer related discussion => Amiga Marketplace => Topic started by: tonyvdb on February 06, 2006, 04:32:37 AM

Title: A3640 CPU 040/25mHz Board for Amiga 3000(T), 4000(T)
Post by: tonyvdb on February 06, 2006, 04:32:37 AM

I just posted this on ebay the listing is here (http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&rd=1&item=8761714890&ssPageName=STRK:MESE:IT)

The card is new and other then testing it has never been used.

Title: Re: A3640 CPU 040/25mHz Board for Amiga 3000(T), 4000(T)
Post by: x56h34 on February 06, 2006, 04:40:48 AM

From the auction page:

Quote

The revision 3.0 aparently does not have the problem of some of the caps installed in backward causing premature failure that the rev3.1 has.

I'm not sure if the caps are oriented correctly with 3.0 cards (probably not), however 3.1 revision is definitely more desirable to have than 3.0, due to 3.0 being a lot more buggy. I don't think it can work with A3000 units, without modification.

Title: Re: A3640 CPU 040/25mHz Board for Amiga 3000(T), 4000(T)
Post by: TjLaZer on February 06, 2006, 05:40:43 AM

This has to be the worst 040 card for the Amiga.  Period.  it's amazing how many of these are still out there.

Title: Re: A3640 CPU 040/25mHz Board for Amiga 3000(T), 4000(T)
Post by: DaBest on February 06, 2006, 05:54:29 AM

I have to agree. There are a lot of those. I wonder where all the A4000 motherboards went after Comodore shut down. :-?  :-?  :-?  :-?  :-?

Title: Re: A3640 CPU 040/25mHz Board for Amiga 3000(T), 4000(T)
Post by: Zac67 on February 06, 2006, 06:12:37 PM

You should maybe add that the Rev 3.0 would most probably not work in an A3000...

Title: Re: A3640 CPU 040/25mHz Board for Amiga 3000(T), 4000(T)
Post by: tonyvdb on February 06, 2006, 07:30:41 PM

Ok, Thanks for the info guys, I have revised the listing. I had a 3000T years back and It had a rev 3.0 in it. so this may be a problem with only some of the cards.