Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: drk421 on February 04, 2006, 02:31:12 AM

Title: GVP A1208 Jumpers?
Post by: drk421 on February 04, 2006, 02:31:12 AM

Does anyone have the jumper settings for the GVP A1208 SCSI/RAM/FPU card?

More specifically, I want to boot from IDE and not the SCSI card, but want to use the FPU and RAM on the card.

Thanks much!

- drk421

Title: Re: GVP A1208 Jumpers?
Post by: amiga1260 on March 18, 2006, 09:14:53 AM

I just bought this card.

To turn off the SCSI ROM you have to remove jumper from J4.

The delay of booting will be shorter. It is still possible to use a SCSI devices, but doesn't boot a hard drive.

J2 only have to remove, if you 're using 4 MB SIMMs.
J1 only have to remove, if you 're using the PCMCIA port.
CN2 Only have to remove, if you don't have a FPU crystal.

The other jumpers J3, J5 to J7, CN1, CN3 to CN4 are reserved don't change the jumper settings.