Amiga.org

Amiga computer related discussion => Amiga Software Issues and Discussion => Topic started by: Srdjan on January 29, 2006, 11:47:11 PM

Title: OS 3.9 install problem
Post by: Srdjan on January 29, 2006, 11:47:11 PM

I'v just finished installing 0s3.9 with new Western-Digital 20gb hard disc on my A1200 PPC603e/25.
Everything was going fine,emergency-disc,four partitions reboot - and then on boot i have following error:
ramlib
Program Failed(#80000008).
Wait for disc activity to finish.

Any ideas??'

Title: Re: OS 3.9 install problem
Post by: Aminux on January 29, 2006, 11:56:20 PM

    I had the same problem when i installed OS3.9 on my Amiga1200,it´s a problem that i managed to solve by adding some STACK in the Startup-Sequence,although some might say this is not the proper way to solve these problems,but i did like that.

Title: Re: OS 3.9 install problem
Post by: InTheSand on January 30, 2006, 05:38:16 AM

Hi,

The OS 3.9 FAQ (http://www.gregdonner.org/os39faq/compatibility.html#2) states this:

Quote

...the ramlib problem is caused by third-party libraries performing too complicated/stack-hungry tasks (opening other diskresident libs) within their init function. These libraries are therefore breaking certain programming rules; and it's not a bug in ramlib itself.

Not sure if that helps!  :-?

 - Ali

Title: Re: OS 3.9 install problem
Post by: doctorq on January 30, 2006, 09:14:44 AM

Sounds to me like someone forgot to install the libraries for the accelerator.

Title: Re: OS 3.9 install problem
Post by: Boot_WB on January 30, 2006, 10:07:09 AM

Well, since the bppc has the 040 and/or 060 libraries resident that is not likely.  :-)

Title: Re: OS 3.9 install problem
Post by: 560SL on January 30, 2006, 10:24:19 AM

Have you installed both BoingBags? I think BoingBag 2 solves the ramlib issue.

Title: Re: OS 3.9 install problem
Post by: Srdjan on January 30, 2006, 11:32:08 AM

I'am at work now , BoingBag is the first thing to do ...
Thanks for help!!