Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Flashlab on December 15, 2005, 09:02:10 PM

Title: How to check if your PIV is working in Z3 mode?
Post by: Flashlab on December 15, 2005, 09:02:10 PM

Well topic title says it all.

I suspect that my Picasso IV is running in Z2 mode although the jumper says it is autosensing. This because a demo program from rtgmaster software is saying the card is it's working in Z2 mode; no matter how I jumper the card...

Title: Re: How to check if your PIV is working in Z3 mode?
Post by: Flashlab on December 15, 2005, 09:12:37 PM

Phew seems like I worried to soon:)

The program P96Speed on the OS3.9 CD seems to detect it correctly as Z3.

Title: Re: How to check if your PIV is working in Z3 mode?
Post by: MastaTabs on December 15, 2005, 09:33:33 PM

to really be sure just fire up showconfig in a shell and watch the PIVs entry. For Z3 it should be 2167/24.

If its in Z2 mode it shows up as 2167/21 2167/22 and 2167/23.