Amiga.org

Amiga computer related discussion => Amiga Marketplace => Topic started by: Snatcher on November 27, 2005, 11:46:08 AM

Title: Toccata only 1 channel soundoutput?
Post by: Snatcher on November 27, 2005, 11:46:08 AM

hi have problems with mine Toccata 16 bit soundcard
I have only 1 channel sound output so only one box of my sterer works.
I have A4000T with 060 and OS3.9I checked the output cables to my stereo and the are correct.
someone pls help!!
thx
 :-?

Title: Re: Toccata only 1 channel soundoutput?
Post by: adonay on November 27, 2005, 11:59:46 AM

try plugging a cd player into the same rca cables that goes out grom the miggy. I could well be the amp linein as well as the card.

adonay :-D

Title: Re: Toccata only 1 channel soundoutput?
Post by: Snatcher on November 27, 2005, 12:31:33 PM

i tried the cable and the cable is ok

Title: Re: Toccata only 1 channel soundoutput?
Post by: Framiga on November 27, 2005, 02:49:50 PM

chose a "16bit Stereo ++" (or whatever is called) mode in AHI Prefs. Sometimes it works.

Which Player are you using?

Title: Re: Toccata only 1 channel soundoutput?
Post by: Snatcher on November 27, 2005, 03:04:14 PM

i am using aminetradio.
But even when i even connect the 'normal' sound of the amiga into the Toccotta i get only 1 chennel output when playing an Amiga game

Title: Re: Toccata only 1 channel soundoutput?
Post by: Piru on November 27, 2005, 03:20:48 PM

Go to AHI prefs. Check that Unit 0, 1, 2 and 3 have more than 1 'Channels' selected. I use 32 for all units myself.

Title: Re: Toccata only 1 channel soundoutput?
Post by: Snatcher on November 28, 2005, 06:20:50 PM

okey, it was mine fault i was using a wrong jack converter.
i used a 'mono' jack converter instead of a 'stereo' converter.
Thanks all for your replies.

Title: Re: Toccata only 1 channel soundoutput?
Post by: amiga1084 on November 28, 2005, 08:14:46 PM

Hello All,

I am having the same problem, I have the same specs as your
machine, I have set AHI to 32 channels and using AmigaAmp
and the engine its using Warp Up. Can anyone tell what jack
I should get the stereo sound from.I am getting the mono
sound from far right jack.What are the other two jacks do?
Please help me as I'm going nuts.Thanks in advance Merv

Title: Re: Toccata only 1 channel soundoutput?
Post by: Snatcher on November 28, 2005, 09:35:10 PM

you need this jack plug:
http://www.maplin.co.uk/Module.aspx?ModuleNo=996&TabID=1&C=SEO&U=SEOsearchPages&doy=search

i bought two of them , 1 for input the amiga sound into the toccata and one for the output to my HIFi set.
that jack plug converter cost me 2.20 euro each.
the left jackinput is for line in, the right jackinput is lineout.
Middle jackinput is microphone iirc.

here i foiund a manual;
http://amiga.resource.cx/manual/Toccata.pdf

it's german only :(  but it helped me :)

Title: Re: Toccata only 1 channel soundoutput?
Post by: Ancalimon on November 19, 2014, 09:11:40 PM

Found this topic while searching for an answer to the same problem.

The guy I bought the Toccata from sent me three jack converters (4.3mm to two rca)

I'm getting some kind of mono audio from one of the speakers this way. (I'm not sure if the audio is stereo on a single speaker, or only left part of the audio is being carried over through the cable). When I try panning audio,t the following happens:

left: no audio, a low cracking volume.
middle: left speaker
right: sound volume increases on the left speaker

It seems lke one of the channels has a very low volume. Maybe dirty Zorro slot? or faulty capacitor on Toccata?